httpd.conf

httpd.conf (text/plain), 15.77 KB, created by Alex Pircher on 2009-01-03 13:26:32 UTC

(hide)

Description: httpd.conf

Filename:

MIME Type:

Creator: Alex Pircher

Created: 2009-01-03 13:26:32 UTC

Size: 15.77 KB

patch

obsolete

># ># This is the main Apache HTTP server configuration file. It contains the ># configuration directives that give the server its instructions. ># See <URL:http://httpd.apache.org/docs/2.2> for detailed information. ># In particular, see ># <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> ># for a discussion of each configuration directive. ># ># Do NOT simply read the instructions in here without understanding ># what they do. They're here only as hints or reminders. If you are unsure ># consult the online docs. You have been warned. ># ># Configuration and logfile names: If the filenames you specify for many ># of the server's control files begin with "/" (or "drive:/" for Win32), the ># server will use that explicit path. If the filenames do *not* begin ># with "/", the value of ServerRoot is prepended -- so "logs/foo_log" ># with ServerRoot set to "/usr/local/bin/httpd" will be interpreted by the ># server as "/usr/local/bin/httpd/logs/foo_log". > ># ># ServerRoot: The top of the directory tree under which the server's ># configuration, error, and log files are kept. ># ># Do not add a slash at the end of the directory path. If you point ># ServerRoot at a non-local disk, be sure to point the LockFile directive ># at a local disk. If you wish to share the same ServerRoot for multiple ># httpd daemons, you will need to change at least LockFile and PidFile. ># >ServerRoot "/usr/local/bin/httpd" > ># ># Listen: Allows you to bind Apache to specific IP addresses and/or ># ports, instead of the default. See also the <VirtualHost> ># directive. ># ># Change this to Listen on specific IP addresses as shown below to ># prevent Apache from glomming onto all bound IP addresses. ># >#Listen 12.34.56.78:80 >Listen 80 > ># ># Dynamic Shared Object (DSO) Support ># ># To be able to use the functionality of a module which was built as a DSO you ># have to place corresponding `LoadModule' lines at this location so the ># directives contained in it are actually available _before_ they are used. ># Statically compiled modules (those listed by `httpd -l') do not need ># to be loaded here. ># ># Example: ># LoadModule foo_module modules/mod_foo.so ># >LoadModule authn_file_module modules/mod_authn_file.so >LoadModule authn_dbm_module modules/mod_authn_dbm.so >LoadModule authn_anon_module modules/mod_authn_anon.so >LoadModule authn_dbd_module modules/mod_authn_dbd.so >LoadModule authn_default_module modules/mod_authn_default.so >LoadModule authz_host_module modules/mod_authz_host.so >LoadModule authz_groupfile_module modules/mod_authz_groupfile.so >LoadModule authz_user_module modules/mod_authz_user.so >LoadModule authz_dbm_module modules/mod_authz_dbm.so >LoadModule authz_owner_module modules/mod_authz_owner.so >LoadModule authz_default_module modules/mod_authz_default.so >LoadModule auth_basic_module modules/mod_auth_basic.so >LoadModule auth_digest_module modules/mod_auth_digest.so >LoadModule dbd_module modules/mod_dbd.so >LoadModule dumpio_module modules/mod_dumpio.so >LoadModule ext_filter_module modules/mod_ext_filter.so >LoadModule include_module modules/mod_include.so >LoadModule filter_module modules/mod_filter.so >LoadModule substitute_module modules/mod_substitute.so >LoadModule deflate_module modules/mod_deflate.so >LoadModule log_config_module modules/mod_log_config.so >LoadModule log_forensic_module modules/mod_log_forensic.so >LoadModule logio_module modules/mod_logio.so >LoadModule env_module modules/mod_env.so >LoadModule mime_magic_module modules/mod_mime_magic.so >LoadModule cern_meta_module modules/mod_cern_meta.so >LoadModule expires_module modules/mod_expires.so >LoadModule headers_module modules/mod_headers.so >LoadModule ident_module modules/mod_ident.so >LoadModule usertrack_module modules/mod_usertrack.so >LoadModule unique_id_module modules/mod_unique_id.so >LoadModule setenvif_module modules/mod_setenvif.so >LoadModule version_module modules/mod_version.so >LoadModule mime_module modules/mod_mime.so >LoadModule dav_module modules/mod_dav.so >LoadModule status_module modules/mod_status.so >LoadModule autoindex_module modules/mod_autoindex.so >LoadModule asis_module modules/mod_asis.so >LoadModule info_module modules/mod_info.so >LoadModule suexec_module modules/mod_suexec.so >LoadModule cgi_module modules/mod_cgi.so >LoadModule dav_fs_module modules/mod_dav_fs.so >LoadModule vhost_alias_module modules/mod_vhost_alias.so >LoadModule negotiation_module modules/mod_negotiation.so >LoadModule dir_module modules/mod_dir.so >LoadModule actions_module modules/mod_actions.so >LoadModule speling_module modules/mod_speling.so >LoadModule userdir_module modules/mod_userdir.so >LoadModule alias_module modules/mod_alias.so >LoadModule rewrite_module modules/mod_rewrite.so > ><IfModule !mpm_netware_module> ><IfModule !mpm_winnt_module> ># ># If you wish httpd to run as a different user or group, you must run ># httpd as root initially and it will switch. ># ># User/Group: The name (or #number) of the user/group to run httpd as. ># It is usually good practice to create a dedicated user and group for ># running httpd, as with most system services. ># >User daemon >Group daemon > ></IfModule> ></IfModule> > ># 'Main' server configuration ># ># The directives in this section set up the values used by the 'main' ># server, which responds to any requests that aren't handled by a ># <VirtualHost> definition. These values also provide defaults for ># any <VirtualHost> containers you may define later in the file. ># ># All of these directives may appear inside <VirtualHost> containers, ># in which case these default settings will be overridden for the ># virtual host being defined. ># > ># ># ServerAdmin: Your address, where problems with the server should be ># e-mailed. This address appears on some server-generated pages, such ># as error documents. e.g. admin@your-domain.com ># >ServerAdmin you@example.com > ># ># ServerName gives the name and port that the server uses to identify itself. ># This can often be determined automatically, but we recommend you specify ># it explicitly to prevent problems during startup. ># ># If your host doesn't have a registered DNS name, enter its IP address here. ># >#ServerName www.example.com:80 > ># ># DocumentRoot: The directory out of which you will serve your ># documents. By default, all requests are taken from this directory, but ># symbolic links and aliases may be used to point to other locations. ># >DocumentRoot "/usr/local/bin/httpd/htdocs" > ># ># Each directory to which Apache has access can be configured with respect ># to which services and features are allowed and/or disabled in that ># directory (and its subdirectories). ># ># First, we configure the "default" to be a very restrictive set of ># features. ># ><Directory /> > Options FollowSymLinks > AllowOverride None > Order deny,allow > Deny from all ></Directory> > ># ># Note that from this point forward you must specifically allow ># particular features to be enabled - so if something's not working as ># you might expect, make sure that you have specifically enabled it ># below. ># > ># ># This should be changed to whatever you set DocumentRoot to. ># ><Directory "/usr/local/bin/httpd/htdocs"> > # > # Possible values for the Options directive are "None", "All", > # or any combination of: > # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews > # > # Note that "MultiViews" must be named *explicitly* --- "Options All" > # doesn't give it to you. > # > # The Options directive is both complicated and important. Please see > # http://httpd.apache.org/docs/2.2/mod/core.html#options > # for more information. > # > Options Indexes FollowSymLinks > > # > # AllowOverride controls what directives may be placed in .htaccess files. > # It can be "All", "None", or any combination of the keywords: > # Options FileInfo AuthConfig Limit > # > AllowOverride None > > # > # Controls who can get stuff from this server. > # > Order allow,deny > Allow from all > ></Directory> > ># ># DirectoryIndex: sets the file that Apache will serve if a directory ># is requested. ># ><IfModule dir_module> > DirectoryIndex index.html ></IfModule> > ># ># The following lines prevent .htaccess and .htpasswd files from being ># viewed by Web clients. ># ><FilesMatch "^\.ht"> > Order allow,deny > Deny from all > Satisfy All ></FilesMatch> > ># ># ErrorLog: The location of the error log file. ># If you do not specify an ErrorLog directive within a <VirtualHost> ># container, error messages relating to that virtual host will be ># logged here. If you *do* define an error logfile for a <VirtualHost> ># container, that host's errors will be logged there and not here. ># >ErrorLog /var/log/httpd/error_log > ># ># LogLevel: Control the number of messages logged to the error_log. ># Possible values include: debug, info, notice, warn, error, crit, ># alert, emerg. ># >LogLevel warn > ><IfModule log_config_module> > # > # The following directives define some format nicknames for use with > # a CustomLog directive (see below). > # > LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined > LogFormat "%h %l %u %t \"%r\" %>s %b" common > > <IfModule logio_module> > # You need to enable mod_logio.c to use %I and %O > LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio > </IfModule> > > # > # The location and format of the access logfile (Common Logfile Format). > # If you do not define any access logfiles within a <VirtualHost> > # container, they will be logged here. Contrariwise, if you *do* > # define per-<VirtualHost> access logfiles, transactions will be > # logged therein and *not* in this file. > # > CustomLog "/var/log/httpd/access_log" common > > # > # If you prefer a logfile with access, agent, and referer information > # (Combined Logfile Format) you can use the following directive. > # > #CustomLog "logs/access_log" combined ></IfModule> > ><IfModule alias_module> > # > # Redirect: Allows you to tell clients about documents that used to > # exist in your server's namespace, but do not anymore. The client > # will make a new request for the document at its new location. > # Example: > # Redirect permanent /foo http://www.example.com/bar > > # > # Alias: Maps web paths into filesystem paths and is used to > # access content that does not live under the DocumentRoot. > # Example: > # Alias /webpath /full/filesystem/path > # > # If you include a trailing / on /webpath then the server will > # require it to be present in the URL. You will also likely > # need to provide a <Directory> section to allow access to > # the filesystem path. > > # > # ScriptAlias: This controls which directories contain server scripts. > # ScriptAliases are essentially the same as Aliases, except that > # documents in the target directory are treated as applications and > # run by the server when requested rather than as documents sent to the > # client. The same rules about trailing "/" apply to ScriptAlias > # directives as to Alias. > # > ScriptAlias /cgi-bin/ "/usr/local/bin/httpd/cgi-bin/" > ></IfModule> > ><IfModule cgid_module> > # > # ScriptSock: On threaded servers, designate the path to the UNIX > # socket used to communicate with the CGI daemon of mod_cgid. > # > #Scriptsock logs/cgisock ></IfModule> > ># ># "/usr/local/bin/httpd/cgi-bin" should be changed to whatever your ScriptAliased ># CGI directory exists, if you have that configured. ># ><Directory "/usr/local/bin/httpd/cgi-bin"> > AllowOverride None > Options None > Order allow,deny > Allow from all ></Directory> > ># ># DefaultType: the default MIME type the server will use for a document ># if it cannot otherwise determine one, such as from filename extensions. ># If your server contains mostly text or HTML documents, "text/plain" is ># a good value. If most of your content is binary, such as applications ># or images, you may want to use "application/octet-stream" instead to ># keep browsers from trying to display binary files as though they are ># text. ># >DefaultType text/plain > ><IfModule mime_module> > # > # TypesConfig points to the file containing the list of mappings from > # filename extension to MIME-type. > # > TypesConfig conf/mime.types > > # > # AddType allows you to add to or override the MIME configuration > # file specified in TypesConfig for specific file types. > # > #AddType application/x-gzip .tgz > # > # AddEncoding allows you to have certain browsers uncompress > # information on the fly. Note: Not all browsers support this. > # > #AddEncoding x-compress .Z > #AddEncoding x-gzip .gz .tgz > # > # If the AddEncoding directives above are commented-out, then you > # probably should define those extensions to indicate media types: > # > AddType application/x-compress .Z > AddType application/x-gzip .gz .tgz > > # > # AddHandler allows you to map certain file extensions to "handlers": > # actions unrelated to filetype. These can be either built into the server > # or added with the Action directive (see below) > # > # To use CGI scripts outside of ScriptAliased directories: > # (You will also need to add "ExecCGI" to the "Options" directive.) > # > #AddHandler cgi-script .cgi > > # For type maps (negotiated resources): > #AddHandler type-map var > > # > # Filters allow you to process content before it is sent to the client. > # > # To parse .shtml files for server-side includes (SSI): > # (You will also need to add "Includes" to the "Options" directive.) > # > #AddType text/html .shtml > #AddOutputFilter INCLUDES .shtml ></IfModule> > ># ># The mod_mime_magic module allows the server to use various hints from the ># contents of the file itself to determine its type. The MIMEMagicFile ># directive tells the module where the hint definitions are located. ># >#MIMEMagicFile conf/magic > ># ># Customizable error responses come in three flavors: ># 1) plain text 2) local redirects 3) external redirects ># ># Some examples: >#ErrorDocument 500 "The server made a boo boo." >#ErrorDocument 404 /missing.html >#ErrorDocument 404 "/cgi-bin/missing_handler.pl" >#ErrorDocument 402 http://www.example.com/subscription_info.html ># > ># ># EnableMMAP and EnableSendfile: On systems that support it, ># memory-mapping or the sendfile syscall is used to deliver ># files. This usually improves server performance, but must ># be turned off when serving from networked-mounted ># filesystems or if support for these functions is otherwise ># broken on your system. ># >#EnableMMAP off >#EnableSendfile off > ># Supplemental configuration ># ># The configuration files in the conf/extra/ directory can be ># included to add extra features or to modify the default configuration of ># the server, or you may simply copy their contents here and change as ># necessary. > ># Server-pool management (MPM specific) >#Include conf/extra/httpd-mpm.conf > ># Multi-language error messages >#Include conf/extra/httpd-multilang-errordoc.conf > ># Fancy directory listings >#Include conf/extra/httpd-autoindex.conf > ># Language settings >#Include conf/extra/httpd-languages.conf > ># User home directories >#Include conf/extra/httpd-userdir.conf > ># Real-time info on requests and configuration >#Include conf/extra/httpd-info.conf > ># Virtual hosts >#Include conf/extra/httpd-vhosts.conf > ># Local access to the Apache HTTP Server Manual >#Include conf/extra/httpd-manual.conf > ># Distributed authoring and versioning (WebDAV) >#Include conf/extra/httpd-dav.conf > ># Various default settings >#Include conf/extra/httpd-default.conf > ># Secure (SSL/TLS) connections >#Include conf/extra/httpd-ssl.conf ># ># Note: The following must must be present to support ># starting without SSL on platforms with no /dev/random equivalent ># but a statically compiled-in mod_ssl. ># ><IfModule ssl_module> >SSLRandomSeed startup builtin >SSLRandomSeed connect builtin ></IfModule> > ><IfModule prefork.c> >StartServers 32 ># Minspareservers must be lower than 132(?) >MinSpareServers 200 >MaxSpareServers 400 >ServerLimit 1600 >MaxClients 1600 >MaxRequestsPerChild 4000 ></IfModule> > >CoreDumpDirectory /tmp > View Attachment As Raw

This is ASF Bugzilla: the Apache Software Foundation bug system. In case of problems with the functioning of ASF Bugzilla, please contact bugzilla-admin@apache.org. Please Note: this e-mail address is only for reporting problems with ASF Bugzilla. Mail about any other subject will be silently ignored.

• • Home
  • | New
  • | Browse
  • | Search
  • |
    [?]
  • | Reports
  • | Help
  • | New Account
  • | Log In
    Remember [x]
  • | Forgot Password
    Login: [x]