jmeter.properties

jmeter.properties (text/x-matlab), 56.73 KB, created by vemular on 2019-07-30 16:59:38 UTC

(hide)

Description: jmeter.properties

Filename:

MIME Type:

Creator: vemular

Created: 2019-07-30 16:59:38 UTC

Size: 56.73 KB

patch

obsolete

>################################################################################ ># Apache JMeter Property file >################################################################################ > >## Licensed to the Apache Software Foundation (ASF) under one or more >## contributor license agreements. See the NOTICE file distributed with >## this work for additional information regarding copyright ownership. >## The ASF licenses this file to You under the Apache License, Version 2.0 >## (the "License"); you may not use this file except in compliance with >## the License. You may obtain a copy of the License at >## >## http://www.apache.org/licenses/LICENSE-2.0 >## >## Unless required by applicable law or agreed to in writing, software >## distributed under the License is distributed on an "AS IS" BASIS, >## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. >## See the License for the specific language governing permissions and >## limitations under the License. > >################################################################################ ># ># THIS FILE SHOULD NOT BE MODIFIED ># ># This avoids having to re-apply the modifications when upgrading JMeter ># Instead only user.properties should be modified: ># 1/ copy the property you want to modify to user.properties from jmeter.properties ># 2/ Change its value there ># >################################################################################ > ># JMeter properties are described in the file ># http://jmeter.apache.org/usermanual/properties_reference.html ># A local copy can be found in ># printable_docs/usermanual/properties_reference.html > >#Preferred GUI language. Comment out to use the JVM default locale's language. >#language=en > > ># Additional locale(s) to add to the displayed list. ># The current default list is: en, fr, de, no, es, tr, ja, zh_CN, zh_TW, pl, pt_BR ># [see JMeterMenuBar#makeLanguageMenu()] ># The entries are a comma-separated list of language names >#locales.add=zu > > >#--------------------------------------------------------------------------- ># XML Parser >#--------------------------------------------------------------------------- > ># Path to a Properties file containing Namespace mapping in the form ># prefix=Namespace ># Example: ># ns=http://biz.aol.com/schema/2006-12-18 >#xpath.namespace.config= > > ># XPath2 query cache for storing compiled XPath queries >#xpath2query.parser.cache.size=400 > >#--------------------------------------------------------------------------- ># SSL configuration >#--------------------------------------------------------------------------- > >## SSL System properties are now in system.properties > ># JMeter no longer converts javax.xxx property entries in this file into System properties. ># These must now be defined in the system.properties file or on the command-line. ># The system.properties file gives more flexibility. > ># By default, SSL session contexts are now created per-thread, rather than being shared. ># The original behaviour can be enabled by setting the JMeter property to true >#https.sessioncontext.shared=false > ># Be aware that https default protocol may vary depending on the version of JVM ># See https://blogs.oracle.com/java-platform-group/entry/diagnosing_tls_ssl_and_https ># See https://bz.apache.org/bugzilla/show_bug.cgi?id=58236 ># Default HTTPS protocol level: >#https.default.protocol=TLS ># This may need to be changed here (or in user.properties) to: >#https.default.protocol=SSLv3 > ># List of protocols to enable. You may have to select only a subset if you find issues with target server. ># This is needed when server does not support Socket version negotiation, this can lead to: ># javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated ># java.net.SocketException: Connection reset ># see https://bz.apache.org/bugzilla/show_bug.cgi?id=54759 >#https.socket.protocols=SSLv2Hello SSLv3 TLSv1 > ># Control if we allow reuse of cached SSL context between iterations ># set the value to 'false' to reset the SSL context each iteration ># Deprecated since 5.0 >#https.use.cached.ssl.context=true > ># ># Reset HTTP State when starting a new Thread Group iteration which means: ># true means next iteration is associated to a new user ># false means next iteration is associated to same user ># true involves: ># - Closing opened connection ># - resetting SSL State >#httpclient.reset_state_on_thread_group_iteration=true > ># Start and end index to be used with keystores with many entries ># The default is to use entry 0, i.e. the first >#https.keyStoreStartIndex=0 >#https.keyStoreEndIndex=0 > >#--------------------------------------------------------------------------- ># Look and Feel configuration >#--------------------------------------------------------------------------- > >#Classname of the Swing default UI ># ># The LAF classnames that are available are now displayed as ToolTip text ># when hovering over the Options/Look and Feel selection list. ># ># You can either use a full class name, as shown below, ># or one of the strings "System" or "CrossPlatform" which means ># JMeter will use the corresponding string returned by UIManager.get<name>LookAndFeelClassName() > ># LAF can be overridden by os.name (lowercased, spaces replaced by '_') ># Sample os.name LAF: >#jmeter.laf.windows_xp=javax.swing.plaf.metal.MetalLookAndFeel > ># Failing that, the OS family = os.name, but only up to first space: ># Sample OS family LAF: >jmeter.laf.windows=com.sun.java.swing.plaf.windows.WindowsLookAndFeel > ># Custom settings for Mac using System LAF if you don't want to use Darcula >#jmeter.laf.mac=System > ># Failing that, the JMeter default laf can be defined: >#jmeter.laf=System > ># If none of the above jmeter.laf properties are defined, JMeter uses the CrossPlatform LAF. ># This is because the CrossPlatform LAF generally looks better than the System LAF. ># See https://bz.apache.org/bugzilla/show_bug.cgi?id=52026 for details ># N.B. the laf can be defined in user.properties. > ># LoggerPanel display ># default to false >jmeter.loggerpanel.display=true > ># Enable LogViewer Panel to receive log event even if closed ># Enabled since 2.12 ># Note this has some impact on performances, but as GUI mode must ># not be used for Load Test it is acceptable >#jmeter.loggerpanel.enable_when_closed=true > ># Max lines kept in LoggerPanel, default to 1000 chars ># 0 means no limit >jmeter.loggerpanel.maxlength=2000 > ># Interval period in ms to process the queue of events of the listeners >#jmeter.gui.refresh_period=500 > ># HiDPI mode (default: false) ># Activate a 'pseudo'-hidpi mode. Allows to increase size of some UI elements ># which are not correctly managed by JVM with high resolution screens in Linux or Windows >#jmeter.hidpi.mode=false ># To enable pseudo-hidpi mode change to true >#jmeter.hidpi.mode=true ># HiDPI scale factor >#jmeter.hidpi.scale.factor=1.0 ># Suggested value for HiDPI >#jmeter.hidpi.scale.factor=2.0 > ># Toolbar display ># Toolbar icon definitions >#jmeter.toolbar.icons=org/apache/jmeter/images/toolbar/icons-toolbar.properties ># Toolbar list >#jmeter.toolbar=new,open,close,save,save_as_testplan,|,cut,copy,paste,|,expand,collapse,toggle,|,test_start,test_stop,test_shutdown,|,test_start_remote_all,test_stop_remote_all,test_shutdown_remote_all,|,test_clear,test_clear_all,|,search,search_reset,|,function_helper,help ># Toolbar icons default size: 22x22. Available sizes are: 22x22, 32x32, 48x48 >#jmeter.toolbar.icons.size=22x22 ># Suggested value for HiDPI >#jmeter.toolbar.icons.size=48x48 > ># Icon definitions ># default: >#jmeter.icons=org/apache/jmeter/images/icon.properties ># alternate: >#jmeter.icons=org/apache/jmeter/images/icon_1.properties ># Historical icon set (deprecated) >#jmeter.icons=org/apache/jmeter/images/icon_old.properties > ># Tree icons default size: 19x19. Available sizes are: 19x19, 24x24, 32x32, 48x48 ># Useful for HiDPI display (see below) >#jmeter.tree.icons.size=19x19 ># Suggested value for HiDPI screen like 3200x1800: >#jmeter.tree.icons.size=32x32 > >#Components to not display in JMeter GUI (GUI class name or static label) ># These elements are deprecated and will be removed in next version: ># MongoDB Script, MongoDB Source Config, Monitor Results ># BSF Elements >not_in_menu=org.apache.jmeter.protocol.mongodb.sampler.MongoScriptSampler,org.apache.jmeter.protocol.mongodb.config.MongoSourceElement,\ > org.apache.jmeter.timers.BSFTimer,org.apache.jmeter.modifiers.BSFPreProcessor,org.apache.jmeter.extractor.BSFPostProcessor,org.apache.jmeter.assertions.BSFAssertion,\ > org.apache.jmeter.visualizers.BSFListener,org.apache.jmeter.protocol.java.sampler.BSFSampler,\ > org.apache.jmeter.protocol.http.control.gui.SoapSamplerGui > ># Number of items in undo history ># Feature is disabled by default (0) due to known and not fixed bugs: ># https://bz.apache.org/bugzilla/show_bug.cgi?id=57043 ># https://bz.apache.org/bugzilla/show_bug.cgi?id=57039 ># https://bz.apache.org/bugzilla/show_bug.cgi?id=57040 ># Set it to a number > 0 (25 can be a good default) ># The bigger it is, the more it consumes memory >#undo.history.size=0 > ># Hotkeys to add JMeter components, will add elements when you press Ctrl+0 .. Ctrl+9 (Command+0 .. Command+9 on Mac) >gui.quick_0=ThreadGroupGui >gui.quick_1=HttpTestSampleGui >gui.quick_2=RegexExtractorGui >gui.quick_3=AssertionGui >gui.quick_4=ConstantTimerGui >gui.quick_5=TestActionGui >gui.quick_6=JSR223PostProcessor >gui.quick_7=JSR223PreProcessor >gui.quick_8=DebugSampler >gui.quick_9=ViewResultsFullVisualizer > > >#--------------------------------------------------------------------------- ># JMX Backup configuration >#--------------------------------------------------------------------------- >#Enable auto backups of the .jmx file when a test plan is saved. >#When enabled, before the .jmx is saved, it will be backed up to the directory pointed >#by the jmeter.gui.action.save.backup_directory property (see below). Backup file names are built >#after the jmx file being saved. For example, saving test-plan.jmx will create a test-plan-000012.jmx >#in the backup directory provided that the last created backup file is test-plan-000011.jmx. >#Default value is true indicating that auto backups are enabled >#jmeter.gui.action.save.backup_on_save=true > >#Set the backup directory path where JMX backups will be created upon save in the GUI. >#If not set (what it defaults to) then backup files will be created in >#a sub-directory of the JMeter base installation. The default directory is ${JMETER_HOME}/backups >#If set and the directory does not exist, it will be created. >#jmeter.gui.action.save.backup_directory= > >#Set the maximum time (in hours) that backup files should be preserved since the save time. >#By default no expiration time is set which means we keep backups for ever. >#jmeter.gui.action.save.keep_backup_max_hours=0 > >#Set the maximum number of backup files that should be preserved. By default 10 backups will be preserved. >#Setting this to zero will cause the backups to not being deleted (unless keep_backup_max_hours is set to a non zero value) >#jmeter.gui.action.save.keep_backup_max_count=10 > >#Enable auto saving of the .jmx file before start run a test plan >#When enabled, before the run, the .jmx will be saved and also backed up to the directory pointed >#save_automatically_before_run=true > >#--------------------------------------------------------------------------- ># Remote hosts and RMI configuration >#--------------------------------------------------------------------------- > ># Remote Hosts - comma delimited >#remote_hosts=127.0.0.1 >#Ravi: 10.77.59.22 >#Mani: 10.77.58.99 >#Ankit: 10.77.56.119 >#Alim: 10.77.56.172 >#Satish: 10.77.57.27 >#Rajesh 10.77.58.135 >#Raghava 10.77.241.134 >#remote_hosts=10.77.241.134,10.77.58.99,10.77.59.22,10.77.58.135 >#remote_hosts=10.77.241.134,10.77.59.22,10.77.58.99,10.77.56.172,10.77.58.135 >remote_hosts=10.77.241.134 >#remote_hosts=localhost:1099,localhost:2010 > ># RMI port to be used by the server (must start rmiregistry with same port) >server_port=1099 > ># To change the port to (say) 1234: ># On the server(s) ># - set server_port=1234 ># - start rmiregistry with port 1234 ># On Windows this can be done by: ># SET SERVER_PORT=1234 ># JMETER-SERVER ># ># On Unix: ># SERVER_PORT=1234 jmeter-server ># ># On the client: ># - set remote_hosts=server:1234 > ># Parameter that controls the RMI port used by RemoteSampleListenerImpl (The Controller) ># Default value is 0 which means port is randomly assigned ># You may need to open Firewall port on the Controller machine >#client.rmi.localport=0 > ># When distributed test is starting, there may be several attempts to initialize ># remote engines. By default, only single try is made. Increase following property ># to make it retry for additional times >client.tries=3 > ># If there is initialization retries, following property sets delay between attempts >client.retries_delay=2000 > ># When all initialization tries was made, test will fail if some remote engines are failed ># Set following property to true to ignore failed nodes and proceed with test >#client.continue_on_fail=false > ># To change the default port (1099) used to access the server: >#server.rmi.port=1234 > ># To use a specific port for the JMeter server engine, define ># the following property before starting the server: >#server.rmi.localport=4000 > ># The jmeter server creates by default the RMI registry as part of the server process. ># To stop the server creating the RMI registry: >#server.rmi.create=false > ># Define the following property to cause JMeter to exit after the first test >#server.exitaftertest=true > ># ># Configuration of Secure RMI connection ># ># Type of keystore : JKS >#server.rmi.ssl.keystore.type=JKS ># ># Keystore file that contains private key >#server.rmi.ssl.keystore.file=rmi_keystore.jks ># ># Password of Keystore >#server.rmi.ssl.keystore.password=changeit ># ># Key alias >#server.rmi.ssl.keystore.alias=rmi ># ># Type of truststore : JKS >#server.rmi.ssl.truststore.type=JKS ># ># Keystore file that contains certificate >#server.rmi.ssl.truststore.file=rmi_keystore.jks ># ># Password of Trust store >#server.rmi.ssl.truststore.password=changeit ># ># Set this if you don't want to use SSL for RMI >server.rmi.ssl.disable=true >#--------------------------------------------------------------------------- ># Include Controller >#--------------------------------------------------------------------------- > ># Prefix used by IncludeController when building file name >#includecontroller.prefix= > >#--------------------------------------------------------------------------- ># Shared HTTP configuration between HC4 and Java Implementations >#--------------------------------------------------------------------------- > ># ># Should JMeter add to POST request content-type header if missing: ># Content-Type: application/x-www-form-urlencoded ># Was true before version 5.0 >#post_add_content_type_if_missing=false > >#--------------------------------------------------------------------------- ># HTTP Java configuration >#--------------------------------------------------------------------------- > ># Number of connection retries performed by HTTP Java sampler before giving up ># 0 means no retry since version 3.0 >#http.java.sampler.retries=0 > >#--------------------------------------------------------------------------- ># Following properties apply to Apache HttpClient >#--------------------------------------------------------------------------- > ># set the socket timeout (or use the parameter http.socket.timeout) ># for AJP Sampler implementation. ># Value is in milliseconds >#httpclient.timeout=0 ># 0 == no timeout > ># Set the http version (defaults to 1.1) >#httpclient.version=1.1 (or use the parameter http.protocol.version) > ># Define characters per second > 0 to emulate slow connections >#httpclient.socket.http.cps=0 >#httpclient.socket.https.cps=0 > >#Enable loopback protocol >#httpclient.loopback=true > ># Define the local host address to be used for multi-homed hosts >#httpclient.localaddress=1.2.3.4 > >#--------------------------------------------------------------------------- ># AuthManager Kerberos configuration >#--------------------------------------------------------------------------- > ># AuthManager Kerberos configuration ># Name of application module used in jaas.conf >#kerberos_jaas_application=JMeter > ># Should ports be stripped from urls before constructing SPNs ># for SPNEGO authentication >#kerberos.spnego.strip_port=true > ># Should credentials be delegated to webservers when using ># SPNEGO authentication >#kerberos.spnego.delegate_cred=false > >#--------------------------------------------------------------------------- ># Apache HttpComponents HTTPClient configuration (HTTPClient4) >#--------------------------------------------------------------------------- > ># define a properties file for overriding Apache HttpClient parameters ># Uncomment this line if you put anything in hc.parameters file >#hc.parameters.file=hc.parameters > ># If true, default HC4 User-Agent will not be added >#httpclient4.default_user_agent_disabled=false > ># Preemptively send Authorization Header when BASIC auth is used >#httpclient4.auth.preemptive=true > ># Number of retries to attempt (default 0) >#httpclient4.retrycount=0 > ># true if it's OK to retry requests that have been sent ># This will retry Idempotent and non Idempotent requests ># This should usually be false, but it can be useful ># when testing against some Load Balancers like Amazon ELB >#httpclient4.request_sent_retry_enabled=false > ># Idle connection timeout (Milliseconds) to apply if the server does not send ># Keep-Alive headers (default 0) ># Set this > 0 to compensate for servers that don't send a Keep-Alive header ># If <= 0, idle timeout will only apply if the server sends a Keep-Alive header >#httpclient4.idletimeout=0 > ># Check connections if the elapsed time (Milliseconds) since the last ># use of the connection exceed this value >#httpclient4.validate_after_inactivity=1700 > ># TTL (in Milliseconds) represents an absolute value. ># No matter what, the connection will not be re-used beyond its TTL. >#httpclient4.time_to_live=2000 > ># Max size in bytes of PUT body to retain in result sampler. ># Bigger results will be clipped. >#httpclient4.max_body_retain_size=32768 > ># Ignore EOFException that some edgy application may emit to signal end of GZIP stream ># Defaults to false >#httpclient4.gzip_relax_mode=false > ># Ignore EOFException that some edgy application may emit to signal end of Deflated stream ># Defaults to false >#httpclient4.deflate_relax_mode=false > >#--------------------------------------------------------------------------- ># HTTP Cache Manager configuration >#--------------------------------------------------------------------------- ># ># Space or comma separated list of methods that can be cached >#cacheable_methods=GET ># N.B. This property is currently a temporary solution for Bug 56162 > ># Since 2.12, JMeter does not create anymore a Sample Result with 204 response ># code for a resource found in cache which is inline with what browser do. >#cache_manager.cached_resource_mode=RETURN_NO_SAMPLE > ># You can choose between 3 modes: ># RETURN_NO_SAMPLE (default) ># RETURN_200_CACHE ># RETURN_CUSTOM_STATUS > ># Those mode have the following behaviours: ># RETURN_NO_SAMPLE: ># this mode returns no Sample Result, it has no additional configuration > ># RETURN_200_CACHE: ># this mode will return Sample Result with response code to 200 and ># response message to "(ex cache)", you can modify response message by setting ># RETURN_200_CACHE.message=(ex cache) > ># RETURN_CUSTOM_STATUS: ># This mode lets you select what response code and message you want to return, ># if you use this mode you need to set those properties ># RETURN_CUSTOM_STATUS.code= ># RETURN_CUSTOM_STATUS.message= > >#--------------------------------------------------------------------------- ># Results file configuration >#--------------------------------------------------------------------------- > ># This section helps determine how result data will be saved. ># The commented out values are the defaults. > ># legitimate values: xml, csv, db. Only xml and csv are currently supported. >#jmeter.save.saveservice.output_format=csv >#jmeter.save.saveservice.output_format=xml > > ># The below properties are true when field should be saved; false otherwise ># ># assertion_results_failure_message only affects CSV output >#jmeter.save.saveservice.assertion_results_failure_message=true ># ># legitimate values: none, first, all >#jmeter.save.saveservice.assertion_results=none ># >#jmeter.save.saveservice.data_type=true >#jmeter.save.saveservice.label=true >#jmeter.save.saveservice.response_code=true ># response_data is not currently supported for CSV output >#jmeter.save.saveservice.response_data=false ># Save ResponseData for failed samples >#jmeter.save.saveservice.response_data.on_error=false >#jmeter.save.saveservice.response_message=true >#jmeter.save.saveservice.successful=true >#jmeter.save.saveservice.thread_name=true >#jmeter.save.saveservice.time=true >#jmeter.save.saveservice.subresults=true >#jmeter.save.saveservice.assertions=true >#jmeter.save.saveservice.latency=true ># Only available with HttpClient4 >#jmeter.save.saveservice.connect_time=true >#jmeter.save.saveservice.samplerData=false >#jmeter.save.saveservice.responseHeaders=false >#jmeter.save.saveservice.requestHeaders=false >#jmeter.save.saveservice.encoding=false >#jmeter.save.saveservice.bytes=true ># Only available with HttpClient4 >#jmeter.save.saveservice.sent_bytes=true >#jmeter.save.saveservice.url=true >#jmeter.save.saveservice.filename=false >#jmeter.save.saveservice.hostname=false >#jmeter.save.saveservice.thread_counts=true >#jmeter.save.saveservice.sample_count=false >#jmeter.save.saveservice.idle_time=true > ># Timestamp format - this only affects CSV output files ># legitimate values: none, ms, or a format suitable for SimpleDateFormat >#jmeter.save.saveservice.timestamp_format=ms >#jmeter.save.saveservice.timestamp_format=yyyy/MM/dd HH:mm:ss.SSS > ># For use with Comma-separated value (CSV) files or other formats ># where the fields' values are separated by specified delimiters. ># Default: >#jmeter.save.saveservice.default_delimiter=| ># For TAB, one can use: >#jmeter.save.saveservice.default_delimiter=\t > ># Only applies to CSV format files: ># Print field names as first line in CSV >#jmeter.save.saveservice.print_field_names=true > ># Optional list of JMeter variable names whose values are to be saved in the result data files. ># Use commas to separate the names. For example: >#sample_variables=SESSION_ID,REFERENCE ># N.B. The current implementation saves the values in XML as attributes, ># so the names must be valid XML names. ># By default JMeter sends the variable to all servers ># to ensure that the correct data is available at the client. > ># Optional xml processing instruction for line 2 of the file: ># Example: >#jmeter.save.saveservice.xml_pi=<?xml-stylesheet type="text/xsl" href="../extras/jmeter-results-detail-report.xsl"?> ># Default value: >#jmeter.save.saveservice.xml_pi= > ># Prefix used to identify filenames that are relative to the current base >#jmeter.save.saveservice.base_prefix=~/ > ># AutoFlush on each line written in XML or CSV output ># Setting this to true will result in less test results data loss in case of Crash ># but with impact on performances, particularly for intensive tests (low or no pauses) ># Since JMeter 2.10, this is false by default >#jmeter.save.saveservice.autoflush=false > >#--------------------------------------------------------------------------- ># Settings that affect SampleResults >#--------------------------------------------------------------------------- > ># Save the start time stamp instead of the end ># This also affects the timestamp stored in result files >sampleresult.timestamp.start=true > ># Whether to use System.nanoTime() - otherwise only use System.currentTimeMillis() >#sampleresult.useNanoTime=true > ># Use a background thread to calculate the nanoTime offset ># Set this to <= 0 to disable the background thread >#sampleresult.nanoThreadSleep=5000 > ># Since version 5.0 JMeter has a new SubResult Naming Policy which numbers subresults by default ># This property if set to true discards renaming policy. This can be required if you're using JMeter for functional testing. ># Defaults to: false >#subresults.disable_renaming=false > >#--------------------------------------------------------------------------- ># Upgrade property >#--------------------------------------------------------------------------- > ># File that holds a record of name changes for backward compatibility issues >upgrade_properties=/bin/upgrade.properties > >#--------------------------------------------------------------------------- ># JMeter Test Script recorder configuration ># ># N.B. The element was originally called the Proxy recorder, which is why the ># properties have the prefix "proxy". >#--------------------------------------------------------------------------- > ># If the recorder detects a gap of at least 5s (default) between HTTP requests, ># it assumes that the user has clicked a new URL >#proxy.pause=5000 > ># Add numeric prefix to Sampler names (default true) >#proxy.number.requests=true > ># List of URL patterns that will be added to URL Patterns to exclude ># Separate multiple lines with ; >#proxy.excludes.suggested=.*\\.(bmp|css|js|gif|ico|jpe?g|png|swf|woff|woff2) > ># Change the default HTTP Sampler (currently HttpClient4) ># Java: >#jmeter.httpsampler=HTTPSampler >#or >#jmeter.httpsampler=Java ># ># HttpClient4.x >#jmeter.httpsampler=HttpClient4 > ># By default JMeter tries to be more lenient with RFC2616 redirects and allows ># relative paths. ># If you want to test strict conformance, set this value to true ># When the property is true, JMeter follows http://tools.ietf.org/html/rfc3986#section-5.2 >#jmeter.httpclient.strict_rfc2616=false > ># Default content-type include filter to use >#proxy.content_type_include=text/html|text/plain|text/xml ># Default content-type exclude filter to use >#proxy.content_type_exclude=image/.*|text/css|application/.* > ># Default headers to remove from Header Manager elements ># (Cookie and Authorization are always removed) >#proxy.headers.remove=If-Modified-Since,If-None-Match,Host > ># Binary content-type handling ># These content-types will be handled by saving the request in a file: >#proxy.binary.types=application/x-amf,application/x-java-serialized-object,binary/octet-stream ># The files will be saved in this directory: >#proxy.binary.directory=user.dir ># The files will be created with this file filesuffix: >#proxy.binary.filesuffix=.binary > >#--------------------------------------------------------------------------- ># Test Script Recorder certificate configuration >#--------------------------------------------------------------------------- > >#proxy.cert.directory=<JMeter bin directory> >#proxy.cert.file=proxyserver.jks >#proxy.cert.type=JKS >#proxy.cert.keystorepass=password >#proxy.cert.keypassword=password >#proxy.cert.factory=SunX509 ># define this property if you wish to use your own keystore >#proxy.cert.alias=<none> ># The default validity for certificates created by JMeter >#proxy.cert.validity=7 ># Use dynamic key generation (if supported by JMeter/JVM) ># If false, will revert to using a single key with no certificate >#proxy.cert.dynamic_keys=true > >#--------------------------------------------------------------------------- ># Test Script Recorder miscellaneous configuration >#--------------------------------------------------------------------------- > ># Whether to attempt disabling of samples that resulted from redirects ># where the generated samples use auto-redirection >#proxy.redirect.disabling=true > ># SSL configuration >#proxy.ssl.protocol=TLS > >#--------------------------------------------------------------------------- ># JMeter Proxy configuration >#--------------------------------------------------------------------------- ># use command-line flags for user-name and password >#http.proxyDomain=NTLM domain, if required by HTTPClient sampler > >#--------------------------------------------------------------------------- ># HTTPSampleResponse Parser configuration >#--------------------------------------------------------------------------- > ># Space-separated list of parser groups >HTTPResponse.parsers=htmlParser wmlParser cssParser ># for each parser, there should be a parser.types and a parser.className property > ># CSS Parser based on ph-css >cssParser.className=org.apache.jmeter.protocol.http.parser.CssParser >cssParser.types=text/css > ># CSS parser LRU cache size ># This cache stores the URLs found in a CSS to avoid continuously parsing the CSS ># By default the cache size is 400 ># It can be disabled by setting its value to 0 >#css.parser.cache.size=400 > ># Let the CSS Parser ignore all css errors >#css.parser.ignore_all_css_errors=true > >#--------------------------------------------------------------------------- ># HTML Parser configuration >#--------------------------------------------------------------------------- > ># Define the HTML parser to be used. ># Default parser: ># This new parser (since 2.10) should perform better than all others ># see https://bz.apache.org/bugzilla/show_bug.cgi?id=55632 ># Do not comment this property >htmlParser.className=org.apache.jmeter.protocol.http.parser.LagartoBasedHtmlParser > ># Other parsers: ># Default parser before 2.10 >#htmlParser.className=org.apache.jmeter.protocol.http.parser.JTidyHTMLParser ># Note that Regexp extractor may detect references that have been commented out. ># In many cases it will work OK, but you should be aware that it may generate ># additional references. >#htmlParser.className=org.apache.jmeter.protocol.http.parser.RegexpHTMLParser ># This parser is based on JSoup, it should be the most accurate but less ># performant than LagartoBasedHtmlParser >#htmlParser.className=org.apache.jmeter.protocol.http.parser.JsoupBasedHtmlParser > >#Used by HTTPSamplerBase to associate htmlParser with content types below >htmlParser.types=text/html application/xhtml+xml application/xml text/xml > >#--------------------------------------------------------------------------- ># WML Parser configuration >#--------------------------------------------------------------------------- > >wmlParser.className=org.apache.jmeter.protocol.http.parser.RegexpHTMLParser > >#Used by HTTPSamplerBase to associate wmlParser with content types below >wmlParser.types=text/vnd.wap.wml > >#--------------------------------------------------------------------------- ># Remote batching configuration >#--------------------------------------------------------------------------- ># How is Sample sender implementations configured: ># - true (default) means client configuration will be used ># - false means server configuration will be used >#sample_sender_client_configured=true > ># By default when Stripping modes are used JMeter since 3.1 will strip ># response even for SampleResults in error. ># If you want to revert to previous behaviour (no stripping of Responses in error) ># set this property to false >#sample_sender_strip_also_on_error=true > ># Remote batching support ># Since JMeter 2.9, default is MODE_STRIPPED_BATCH, which returns samples in ># batch mode (every 100 samples or every minute by default) ># Note also that MODE_STRIPPED_BATCH strips response data from SampleResult, so if you need it change to ># another mode ># Batch returns samples in batches ># Statistical returns sample summary statistics ># mode can also be the class name of an implementation of org.apache.jmeter.samplers.SampleSender >#mode=Standard >#mode=Batch >#mode=Statistical >#Set to true to key statistical samples on threadName rather than threadGroup >#key_on_threadname=false >#mode=Stripped >#mode=StrippedBatch >#mode=org.example.load.MySampleSender ># >#num_sample_threshold=100 ># Value is in milliseconds >#time_threshold=60000 ># ># Asynchronous sender; uses a queue and background worker process to return the samples >#mode=Asynch ># default queue size >#asynch.batch.queue.size=100 ># Same as Asynch but strips response data from SampleResult >#mode=StrippedAsynch ># ># DiskStore: Serialises the samples to disk, rather than saving in memory >#mode=DiskStore ># Same as DiskStore but strips response data from SampleResult >#mode=StrippedDiskStore ># Note: the mode is currently resolved on the client; ># other properties (e.g. time_threshold) are resolved on the server. > >#--------------------------------------------------------------------------- ># JDBC Request configuration >#--------------------------------------------------------------------------- > ># String used to indicate a null value >#jdbcsampler.nullmarker=]NULL[ ># ># Max size of BLOBs and CLOBs to store in JDBC sampler. Result will be cut off >#jdbcsampler.max_retain_result_size=65536 > ># Database validation query ># based in https://stackoverflow.com/questions/10684244/dbcp-validationquery-for-different-databases list >jdbc.config.check.query=select 1 from INFORMATION_SCHEMA.SYSTEM_USERS|select 1 from dual|select 1 from sysibm.sysdummy1|select 1|select 1 from rdb$database >jdbc.config.jdbc.driver.class=com.mysql.jdbc.Driver|org.postgresql.Driver|oracle.jdbc.OracleDriver|com.ingres.jdbc.IngresDriver|com.microsoft.sqlserver.jdbc.SQLServerDriver|com.microsoft.jdbc.sqlserver.SQLServerDriver|org.apache.derby.jdbc.ClientDriver|org.hsqldb.jdbc.JDBCDriver|com.ibm.db2.jcc.DB2Driver|org.apache.derby.jdbc.ClientDriver|org.h2.Driver|org.firebirdsql.jdbc.FBDriver|org.mariadb.jdbc.Driver|org.sqlite.JDBC|net.sourceforge.jtds.jdbc.Driver > >#--------------------------------------------------------------------------- ># OS Process Sampler configuration >#--------------------------------------------------------------------------- ># Polling to see if process has finished its work, used when a timeout is configured on sampler >#os_sampler.poll_for_timeout=100 > >#--------------------------------------------------------------------------- ># TCP Sampler configuration >#--------------------------------------------------------------------------- > ># The default handler class >#tcp.handler=TCPClientImpl ># ># eolByte = byte value for end of line ># set this to a value outside the range -128 to +127 to skip eol checking >#tcp.eolByte=1000 ># ># TCP Charset, used by org.apache.jmeter.protocol.tcp.sampler.TCPClientImpl ># default to Platform defaults charset as returned by Charset.defaultCharset().name() >#tcp.charset= ># ># status.prefix and suffix = strings that enclose the status response code >#tcp.status.prefix=Status= >#tcp.status.suffix=. ># ># status.properties = property file to convert codes to messages >#tcp.status.properties=mytestfiles/tcpstatus.properties > ># The length prefix used by LengthPrefixedBinaryTCPClientImpl implementation ># defaults to 2 bytes. >#tcp.binarylength.prefix.length=2 > >#--------------------------------------------------------------------------- ># Summariser - Generate Summary Results - configuration (mainly applies to non-GUI mode) >#--------------------------------------------------------------------------- ># ># Comment the following property to disable the default non-GUI summariser ># [or change the value to rename it] ># (applies to non-GUI mode only) >summariser.name=summary ># ># interval between summaries (in seconds) default 30 seconds >#summariser.interval=30 ># ># Write messages to log file >#summariser.log=true ># ># Write messages to System.out >#summariser.out=true > ># Ignore SampleResults generated by TransactionControllers ># defaults to true >#summariser.ignore_transaction_controller_sample_result=true > > >#--------------------------------------------------------------------------- ># Aggregate Report and Aggregate Graph - configuration >#--------------------------------------------------------------------------- ># ># Percentiles to display in reports ># Can be float value between 0 and 100 ># First percentile to display, defaults to 90% >#aggregate_rpt_pct1=90 ># Second percentile to display, defaults to 95% >#aggregate_rpt_pct2=95 ># Second percentile to display, defaults to 99% >#aggregate_rpt_pct3=99 > >#--------------------------------------------------------------------------- ># BackendListener - configuration >#--------------------------------------------------------------------------- ># ># Backend metrics window mode (fixed=fixed-size window, timed=time boxed) >#backend_metrics_window_mode=fixed ># Backend metrics sliding window size for Percentiles, Min, Max >#backend_metrics_window=100 > ># Backend metrics sliding window size for Percentiles, Min, Max ># when backend_metrics_window_mode is timed ># Setting this value too high can lead to OOM >#backend_metrics_large_window=5000 > >######################## ># Graphite Backend >######################## ># Send interval in second ># Defaults to 1 second >#backend_graphite.send_interval=1 > >######################## ># Influx Backend >######################## > ># Send interval in second ># Defaults to 5 seconds >#backend_influxdb.send_interval=5 >#Influxdb timeouts >#backend_influxdb.connection_timeout=1000 >#backend_influxdb.socket_timeout=3000 >#backend_influxdb.connection_request_timeout=100 > >#--------------------------------------------------------------------------- ># BeanShell configuration >#--------------------------------------------------------------------------- > ># BeanShell Server properties ># ># Define the port number as non-zero to start the http server on that port >#beanshell.server.port=9000 ># The telnet server will be started on the next port > ># ># Define the server initialisation file >beanshell.server.file=../extras/startup.bsh > ># ># Define a file to be processed at startup ># This is processed using its own interpreter. >#beanshell.init.file= > ># ># Define the intialisation files for BeanShell Sampler, Function and other BeanShell elements ># N.B. Beanshell test elements do not share interpreters. ># Each element in each thread has its own interpreter. ># This is retained between samples. >#beanshell.sampler.init=BeanShellSampler.bshrc >#beanshell.function.init=BeanShellFunction.bshrc >#beanshell.assertion.init=BeanShellAssertion.bshrc >#beanshell.listener.init=etc >#beanshell.postprocessor.init=etc >#beanshell.preprocessor.init=etc >#beanshell.timer.init=etc > ># The file BeanShellListeners.bshrc contains sample definitions ># of Test and Thread Listeners. > >#--------------------------------------------------------------------------- ># JSR-223 function >#--------------------------------------------------------------------------- > ># Path to JSR-223 file containing script to call on JMeter startup ># JMeter will try to guess the engine to use by the extension ># of the name of the file. ># This script can use pre-defined variables: ># log : Logger to log any message ># props : JMeter Property ># OUT : System.OUT >#jsr223.init.file= > >#--------------------------------------------------------------------------- ># Groovy function >#--------------------------------------------------------------------------- > >#Path to Groovy file containing utility functions to make available to __groovy function >#groovy.utilities= > ># Example >#groovy.utilities=bin/utility.groovy > >#--------------------------------------------------------------------------- ># MailerModel configuration >#--------------------------------------------------------------------------- > ># Number of successful samples before a message is sent >#mailer.successlimit=2 ># ># Number of failed samples before a message is sent >#mailer.failurelimit=2 > >#--------------------------------------------------------------------------- ># CSVRead configuration >#--------------------------------------------------------------------------- > ># CSVRead delimiter setting (default ",") ># Make sure that there are no trailing spaces or tabs after the delimiter ># characters, or these will be included in the list of valid delimiters >#csvread.delimiter=, >#csvread.delimiter=; >#csvread.delimiter=! >#csvread.delimiter=~ ># The following line has a tab after the = >#csvread.delimiter= > >#--------------------------------------------------------------------------- ># __time() function configuration ># ># The properties below can be used to redefine the default formats >#--------------------------------------------------------------------------- >#time.YMD=yyyyMMdd >#time.HMS=HHmmss >#time.YMDHMS=yyyyMMdd-HHmmss >#time.USER1= >#time.USER2= > >#--------------------------------------------------------------------------- ># CSV DataSet configuration >#--------------------------------------------------------------------------- > ># String to return at EOF (if recycle not used) >#csvdataset.eofstring=<EOF> >#list in https://docs.oracle.com/javase/8/docs/technotes/guides/intl/encoding.doc.html >csvdataset.file.encoding_list=UTF-8|UTF-16|ISO-8859-15|US-ASCII > > >#--------------------------------------------------------------------------- ># LDAP Sampler configuration >#--------------------------------------------------------------------------- ># Maximum number of search results returned by a search that will be sorted ># to guarantee a stable ordering (if more results then this limit are returned ># then no sorting is done). Set to 0 to turn off all sorting, in which case ># "Equals" response assertions will be very likely to fail against search results. ># >#ldapsampler.max_sorted_results=1000 > ># Number of characters to log for each of three sections (starting matching section, diff section, ># ending matching section where not all sections will appear for all diffs) diff display when an Equals ># assertion fails. So a value of 100 means a maximum of 300 characters of diff text will be displayed ># (+ a number of extra characters like "..." and "[[["/"]]]" which are used to decorate it). >#assertion.equals_section_diff_len=100 ># test written out to log to signify start/end of diff delta >#assertion.equals_diff_delta_start=[[[ >#assertion.equals_diff_delta_end=]]] > >#--------------------------------------------------------------------------- ># Miscellaneous configuration >#--------------------------------------------------------------------------- > ># Size of cache used by CSS Selector Extractor (for JODD implementation only) ># to store parsed CSS Selector expressions. >#cssselector.parser.cache.size=400 > > ># Used to control what happens when you start a test and ># have listeners that could overwrite existing result files ># Possible values: ># ASK : Ask user ># APPEND : Append results to existing file ># DELETE : Delete existing file and start a new file >#resultcollector.action_if_file_exists=ASK > ># If defined, then start the mirror server on the port >#mirror.server.port=8081 > ># ORO PatternCacheLRU size >#oro.patterncache.size=1000 > >#TestBeanGui ># >#propertyEditorSearchPath=null > ># Turn expert mode on/off: expert mode will show expert-mode beans and properties >#jmeter.expertMode=true > ># Max size of bytes stored in memory per SampleResult ># Ensure you don't exceed max capacity of a Java Array and remember ># that the higher it is, the higher JMeter will consume heap ># Defaults to 0, which means no truncation >#httpsampler.max_bytes_to_store_per_request=0 > ># Max size of buffer in bytes used when reading responses ># Defaults to 64k >#httpsampler.max_buffer_size=66560 > ># Maximum redirects to follow in a single sequence (default 20) >#httpsampler.max_redirects=20 ># Maximum frame/iframe nesting depth (default 5) >#httpsampler.max_frame_depth=5 > ># Revert to BUG 51939 behaviour (no separate container for embedded resources) by setting the following false: >#httpsampler.separate.container=true > ># If embedded resources download fails due to missing resources or other reasons, if this property is true ># Parent sample will not be marked as failed >#httpsampler.ignore_failed_embedded_resources=false > >#keep alive time for the parallel download threads (in seconds) >#httpsampler.parallel_download_thread_keepalive_inseconds=60 > ># Don't keep the embedded resources response data : just keep the size and the md5 ># default to false >#httpsampler.embedded_resources_use_md5=false > ># List of extra HTTP methods that should be available in select box >#httpsampler.user_defined_methods=VERSION-CONTROL,REPORT,CHECKOUT,CHECKIN,UNCHECKOUT,MKWORKSPACE,UPDATE,LABEL,MERGE,BASELINE-CONTROL,MKACTIVITY > ># The encoding to be used if none is provided (default ISO-8859-1) >#sampleresult.default.encoding=ISO-8859-1 > ># CookieManager behaviour - should cookies with null/empty values be deleted? ># Default is true. Use false to revert to original behaviour >#CookieManager.delete_null_cookies=true > ># CookieManager behaviour - should variable cookies be allowed? ># Default is true. Use false to revert to original behaviour >#CookieManager.allow_variable_cookies=true > ># CookieManager behaviour - should Cookies be stored as variables? ># Default is false >#CookieManager.save.cookies=false > ># CookieManager behaviour - prefix to add to cookie name before storing it as a variable ># Default is COOKIE_; to remove the prefix, define it as one or more spaces >#CookieManager.name.prefix= > ># CookieManager behaviour - check received cookies are valid before storing them? ># Default is true. Use false to revert to previous behaviour >#CookieManager.check.cookies=true > ># Netscape HTTP Cookie file >cookies=cookies > ># Ability to switch to Nashorn as default Javascript Engine used by IfController and __javaScript function ># JMeter works as following: ># - JDK >= 8 and javascript.use_rhino=false or not set : Nashorn ># - JDK >= 8 and javascript.use_rhino=true: Rhino ># If you want to use Rhino on JDK8, set this property to true >#javascript.use_rhino=false > ># Number of milliseconds to wait for a thread to stop >#jmeterengine.threadstop.wait=5000 > >#Whether to invoke System.exit(0) in server exit code after stopping RMI >#jmeterengine.remote.system.exit=false > ># Whether to call System.exit(1) on failure to stop threads in non-GUI mode. ># This only takes effect if the test was explicitly requested to stop. ># If this is disabled, it may be necessary to kill the JVM externally >#jmeterengine.stopfail.system.exit=true > ># Whether to force call System.exit(0) at end of test in non-GUI mode, even if ># there were no failures and the test was not explicitly asked to stop. ># Without this, the JVM may never exit if there are other threads spawned by ># the test which never exit. >#jmeterengine.force.system.exit=false > ># How long to pause (in ms) in the daemon thread before reporting that the JVM has failed to exit. ># If the value is <= 0, the JMeter does not start the daemon thread >#jmeter.exit.check.pause=2000 > ># If running non-GUI, then JMeter listens on the following port for a shutdown message. ># To disable, set the port to 1000 or less. >#jmeterengine.nongui.port=4445 ># ># If the initial port is busy, keep trying until this port is reached ># (to disable searching, set the value less than or equal to the .port property) >#jmeterengine.nongui.maxport=4455 > ># How often to check for shutdown during ramp-up (milliseconds) >#jmeterthread.rampup.granularity=1000 > >#Should JMeter expand the tree when loading a test plan? ># default value is false since JMeter 2.7 >#onload.expandtree=false > >#JSyntaxTextArea configuration >#jsyntaxtextarea.wrapstyleword=true >#jsyntaxtextarea.linewrap=true >#jsyntaxtextarea.codefolding=true ># Set 0 to disable undo feature in JSyntaxTextArea >#jsyntaxtextarea.maxundos=50 ># Change the font on the (JSyntax) Text Areas. (Useful for HiDPI screens) >#jsyntaxtextarea.font.family=Hack >#jsyntaxtextarea.font.size=14 > ># Set this to false to disable the use of JSyntaxTextArea for the Console Logger panel >#loggerpanel.usejsyntaxtext=true > ># Maximum size of HTML page that can be displayed; default=10 mbytes ># Set to 0 to disable the size check and display the whole response >#view.results.tree.max_size=10485760 > ># Order of Renderers in View Results Tree ># Note full class names should be used for non jmeter core renderers ># For JMeter core renderers, class names start with . and are automatically ># prefixed with org.apache.jmeter.visualizers >view.results.tree.renderers_order=.RenderAsText,.RenderAsRegexp,.RenderAsBoundaryExtractor,.RenderAsCssJQuery,.RenderAsXPath,org.apache.jmeter.extractor.json.render.RenderAsJsonRenderer,.RenderAsHTML,.RenderAsHTMLFormatted,.RenderAsHTMLWithEmbedded,.RenderAsDocument,.RenderAsJSON,.RenderAsXML > ># Maximum number of results in the results tree ># Set to 0 to store all results (might consume a lot of memory) >#view.results.tree.max_results=500 > ># Maximum size of Document that can be parsed by Tika engine; defaut=10 * 1024 * 1024 (10MB) ># Set to 0 to disable the size check >#document.max_size=0 > >#JMS options ># Enable the following property to stop JMS Point-to-Point Sampler from using ># the properties java.naming.security.[principal|credentials] when creating the queue connection >#JMSSampler.useSecurity.properties=false > ># Set the following value to true in order to skip the delete confirmation dialogue >#confirm.delete.skip=false > ># Used by JSR223 elements ># Size of compiled scripts cache >#jsr223.compiled_scripts_cache_size=100 > >#--------------------------------------------------------------------------- ># Classpath configuration >#--------------------------------------------------------------------------- > ># List of directories (separated by ;) to search for additional JMeter plugin classes, ># for example new GUI elements and samplers. ># Any jar file in such a directory will be automatically included, ># jar files in sub directories are ignored. ># The given value is in addition to any jars found in the lib/ext directory. ># Do not use this for utility or plugin dependency jars. >#search_paths=/app1/lib;/app2/lib > ># List of directories that JMeter will search for utility and plugin dependency classes. ># Use your platform path separator to separate multiple paths. ># Any jar file in such a directory will be automatically included, ># jar files in sub directories are ignored. ># The given value is in addition to any jars found in the lib directory. ># All entries will be added to the class path of the system class loader ># and also to the path of the JMeter internal loader. ># Paths with spaces may cause problems for the JVM >#user.classpath=../classes;../lib > ># List of directories (separated by ;) that JMeter will search for utility ># and plugin dependency classes. ># Any jar file in such a directory will be automatically included, ># jar files in sub directories are ignored. ># The given value is in addition to any jars found in the lib directory ># or given by the user.classpath property. ># All entries will be added to the path of the JMeter internal loader only. ># For plugin dependencies this property should be used instead of user.classpath. >#plugin_dependency_paths=../dependencies/lib;../app1/;../app2/ > ># Classpath finder ># ================ ># The classpath finder currently needs to load every single JMeter class to find ># the classes it needs. ># For non-GUI mode, it's only necessary to scan for Function classes, but all classes ># are still loaded. ># All current Function classes include ".function." in their name, ># and none include ".gui." in the name, so the number of unwanted classes loaded can be ># reduced by checking for these. However, if a valid function class name does not match ># these restrictions, it will not be loaded. If problems are encountered, then comment ># or change the following properties: >classfinder.functions.contain=.functions. >classfinder.functions.notContain=.gui. > > >#--------------------------------------------------------------------------- ># Additional property files to load >#--------------------------------------------------------------------------- > ># Should JMeter automatically load additional JMeter properties? ># File name to look for (comment to disable) >user.properties=user.properties > ># Should JMeter automatically load additional system properties? ># File name to look for (comment to disable) >system.properties=system.properties > ># Comma separated list of files that contain reference to templates and their description ># Path must be relative to JMeter root folder >#template.files=/bin/templates/templates.xml > > >#--------------------------------------------------------------------------- ># Thread Group Validation feature >#--------------------------------------------------------------------------- > ># Validation is the name of the feature used to rapidly validate a Thread Group runs fine ># Default implementation is org.apache.jmeter.gui.action.validation.TreeClonerForValidation ># It runs validation without timers, with 1 thread, 1 iteration and Startup Delay set to 0 ># You can implement your own policy that must extend org.apache.jmeter.engine.TreeCloner ># JMeter will instantiate it and use it to create the Tree used to run validation on Thread Group >#testplan_validation.tree_cloner_class=org.apache.jmeter.validation.ComponentTreeClonerForValidation > ># Number of threads to use to validate a Thread Group >#testplan_validation.nb_threads_per_thread_group=1 > ># Ignore BackendListener when validating the thread group of plan >#testplan_validation.ignore_backends=true > ># Ignore timers when validating the thread group of plan >#testplan_validation.ignore_timers=true > ># Number of iterations to use to validate a Thread Group >#testplan_validation.number_iterations=1 > ># Force throuput controllers that work in percentage mode to be a 100% ># Disabled by default >#testplan_validation.tpc_force_100_pct=false > >#--------------------------------------------------------------------------- ># Think Time configuration >#--------------------------------------------------------------------------- > ># ># Apply a factor on computed pauses by the following Timers: ># - Gaussian Random Timer ># - Uniform Random Timer ># - Poisson Random Timer ># >#timer.factor=1.0f > ># Default implementation that create the Timer structure to add to Test Plan ># Implementation of interface org.apache.jmeter.gui.action.thinktime.ThinkTimeCreator >#think_time_creator.impl=org.apache.jmeter.thinktime.DefaultThinkTimeCreator > ># Default Timer GUI class added to Test Plan by DefaultThinkTimeCreator >#think_time_creator.default_timer_implementation=org.apache.jmeter.timers.gui.UniformRandomTimerGui > ># Default constant pause of Timer >#think_time_creator.default_constant_pause=1000 > ># Default range pause of Timer >#think_time_creator.default_range=100 > > ># Change this parameter if you want to override the APDEX satisfaction threshold. >jmeter.reportgenerator.apdex_satisfied_threshold=500 > ># Change this parameter if you want to override the APDEX tolerance threshold. >jmeter.reportgenerator.apdex_tolerated_threshold=1500 > ># Timeout in milliseconds for Report generation when using Tools > Generate HTML report >#generate_report_ui.generation_timeout=120000 >#--------------------------------------------------------------------------- ># Naming Policy configuration >#--------------------------------------------------------------------------- > ># Prefix used when naming elements >#naming_policy.prefix= ># Suffix used when naming elements >#naming_policy.suffix= > ># Implementation of interface org.apache.jmeter.gui.action.TreeNodeNamingPolicy >#naming_policy.impl=org.apache.jmeter.gui.action.impl.DefaultTreeNodeNamingPolicy > >#--------------------------------------------------------------------------- ># Help Documentation >#--------------------------------------------------------------------------- > ># Switch that allows using Local documentation opened in JMeter GUI ># By default we use Online documentation opened in Browser >#help.local=false > >#--------------------------------------------------------------------------- ># Documentation generation >#--------------------------------------------------------------------------- > ># Path to XSL file used to generate Schematic View of Test Plan ># When empty, JMeter will use the embedded one in src/core/org/apache/jmeter/gui/action/schematic.xsl >#docgeneration.schematic_xsl= ># For Create Request: sample_variables=consumingapp,docclass,userid,creator,doctitle,repositoryid,guid,resultmessage,mimetype ># These sample_variables are referenced by Flexible File Writer (FFW) to write the data to a file. All input type variables of these should be populated by "CSV Data Set Config". All output type variables of these should be populated by "Regular Expression Extractor". These are referneced by FFW as v#0, v#1, v#2 .....etc..... > >#consumingapp v0,repositoryid v1,docclass v2,userid v3,creator v4,doctitle v5,mimetype v6,resultmessage v7,outputresultmessage v8,outputmimetype v9,guidnumber v10,outputguidnumber v11,nybedocid v12,outputnybedocid v13, qrs_condition_string v14,testapplicationID v15,outputwcbcaseid v16,wcbcaseid v17, variable18 v18, variable19 v19, variable20 v20, variable21 v21, variable22 v22, variable23 v23, >#sample_variables=consumingapp,repositoryid,docclass,userid,creator,doctitle,mimetype,resultmessage,outputresultmessage,outputmimetype,guidnumber,outputguidnumber,nybedocid,outputnybedocid,qrs_condition_string,testapplicationID,outputwcbcaseid,wcbcaseid,variable18,variable19,variable20,variable21,variable22,variable23 >#sample_variables= View Attachment As Raw

This is ASF Bugzilla: the Apache Software Foundation bug system. In case of problems with the functioning of ASF Bugzilla, please contact bugzilla-admin@apache.org. Please Note: this e-mail address is only for reporting problems with ASF Bugzilla. Mail about any other subject will be silently ignored.

• • Home
  • | New
  • | Browse
  • | Search
  • |
    [?]
  • | Reports
  • | Help
  • | New Account
  • | Log In
    Remember [x]
  • | Forgot Password
    Login: [x]