jmeter.properties of master jmeter

jmeter.properties (text/x-matlab), 55.20 KB, created by pierre.astruc on 2019-08-21 11:13:42 UTC

(hide)

Description: jmeter.properties of master jmeter

Filename:

MIME Type:

Creator: pierre.astruc

Created: 2019-08-21 11:13:42 UTC

Size: 55.20 KB

patch

obsolete

>################################################################################ ># Apache JMeter Property file >################################################################################ > >## Licensed to the Apache Software Foundation (ASF) under one or more >## contributor license agreements. See the NOTICE file distributed with >## this work for additional information regarding copyright ownership. >## The ASF licenses this file to You under the Apache License, Version 2.0 >## (the "License"); you may not use this file except in compliance with >## the License. You may obtain a copy of the License at >## >## http://www.apache.org/licenses/LICENSE-2.0 >## >## Unless required by applicable law or agreed to in writing, software >## distributed under the License is distributed on an "AS IS" BASIS, >## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. >## See the License for the specific language governing permissions and >## limitations under the License. > >################################################################################ ># ># THIS FILE SHOULD NOT BE MODIFIED ># ># This avoids having to re-apply the modifications when upgrading JMeter ># Instead only user.properties should be modified: ># 1/ copy the property you want to modify to user.properties from jmeter.properties ># 2/ Change its value there ># >################################################################################ > ># JMeter properties are described in the file ># http://jmeter.apache.org/usermanual/properties_reference.html ># A local copy can be found in ># printable_docs/usermanual/properties_reference.html > >#Preferred GUI language. Comment out to use the JVM default locale's language. >#language=en > > ># Additional locale(s) to add to the displayed list. ># The current default list is: en, fr, de, no, es, tr, ja, zh_CN, zh_TW, pl, pt_BR ># [see JMeterMenuBar#makeLanguageMenu()] ># The entries are a comma-separated list of language names >#locales.add=zu > > >#--------------------------------------------------------------------------- ># XML Parser >#--------------------------------------------------------------------------- > ># Path to a Properties file containing Namespace mapping in the form ># prefix=Namespace ># Example: ># ns=http://biz.aol.com/schema/2006-12-18 >#xpath.namespace.config= > > ># XPath2 query cache for storing compiled XPath queries >#xpath2query.parser.cache.size=400 > >#--------------------------------------------------------------------------- ># SSL configuration >#--------------------------------------------------------------------------- > >## SSL System properties are now in system.properties > ># JMeter no longer converts javax.xxx property entries in this file into System properties. ># These must now be defined in the system.properties file or on the command-line. ># The system.properties file gives more flexibility. > ># By default, SSL session contexts are now created per-thread, rather than being shared. ># The original behaviour can be enabled by setting the JMeter property to true >#https.sessioncontext.shared=false > ># Be aware that https default protocol may vary depending on the version of JVM ># See https://blogs.oracle.com/java-platform-group/entry/diagnosing_tls_ssl_and_https ># See https://bz.apache.org/bugzilla/show_bug.cgi?id=58236 ># Default HTTPS protocol level: >#https.default.protocol=TLS ># This may need to be changed here (or in user.properties) to: >#https.default.protocol=SSLv3 > ># List of protocols to enable. You may have to select only a subset if you find issues with target server. ># This is needed when server does not support Socket version negotiation, this can lead to: ># javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated ># java.net.SocketException: Connection reset ># see https://bz.apache.org/bugzilla/show_bug.cgi?id=54759 >#https.socket.protocols=SSLv2Hello SSLv3 TLSv1 > ># Control if we allow reuse of cached SSL context between iterations ># set the value to 'false' to reset the SSL context each iteration ># Deprecated since 5.0 >#https.use.cached.ssl.context=true > ># ># Reset HTTP State when starting a new Thread Group iteration which means: ># true means next iteration is associated to a new user ># false means next iteration is associated to same user ># true involves: ># - Closing opened connection ># - resetting SSL State >#httpclient.reset_state_on_thread_group_iteration=true > ># Start and end index to be used with keystores with many entries ># The default is to use entry 0, i.e. the first >#https.keyStoreStartIndex=0 >#https.keyStoreEndIndex=0 > >#--------------------------------------------------------------------------- ># Look and Feel configuration >#--------------------------------------------------------------------------- > >#Classname of the Swing default UI ># ># The LAF classnames that are available are now displayed as ToolTip text ># when hovering over the Options/Look and Feel selection list. ># ># You can either use a full class name, as shown below, ># or one of the strings "System" or "CrossPlatform" which means ># JMeter will use the corresponding string returned by UIManager.get<name>LookAndFeelClassName() > ># LAF can be overridden by os.name (lowercased, spaces replaced by '_') ># Sample os.name LAF: >#jmeter.laf.windows_xp=javax.swing.plaf.metal.MetalLookAndFeel > ># Failing that, the OS family = os.name, but only up to first space: ># Sample OS family LAF: >#jmeter.laf.windows=com.sun.java.swing.plaf.windows.WindowsLookAndFeel > ># Custom settings for Mac using System LAF if you don't want to use Darcula >#jmeter.laf.mac=System > ># Failing that, the JMeter default laf can be defined: >#jmeter.laf=System > ># If none of the above jmeter.laf properties are defined, JMeter uses the CrossPlatform LAF. ># This is because the CrossPlatform LAF generally looks better than the System LAF. ># See https://bz.apache.org/bugzilla/show_bug.cgi?id=52026 for details ># N.B. the laf can be defined in user.properties. > ># LoggerPanel display ># default to false >#jmeter.loggerpanel.display=false > ># Enable LogViewer Panel to receive log event even if closed ># Enabled since 2.12 ># Note this has some impact on performances, but as GUI mode must ># not be used for Load Test it is acceptable >#jmeter.loggerpanel.enable_when_closed=true > ># Max lines kept in LoggerPanel, default to 1000 chars ># 0 means no limit >#jmeter.loggerpanel.maxlength=1000 > ># Interval period in ms to process the queue of events of the listeners >#jmeter.gui.refresh_period=500 > ># HiDPI mode (default: false) ># Activate a 'pseudo'-hidpi mode. Allows to increase size of some UI elements ># which are not correctly managed by JVM with high resolution screens in Linux or Windows >#jmeter.hidpi.mode=false ># To enable pseudo-hidpi mode change to true >#jmeter.hidpi.mode=true ># HiDPI scale factor >#jmeter.hidpi.scale.factor=1.0 ># Suggested value for HiDPI >#jmeter.hidpi.scale.factor=2.0 > ># Toolbar display ># Toolbar icon definitions >#jmeter.toolbar.icons=org/apache/jmeter/images/toolbar/icons-toolbar.properties ># Toolbar list >#jmeter.toolbar=new,open,close,save,save_as_testplan,|,cut,copy,paste,|,expand,collapse,toggle,|,test_start,test_stop,test_shutdown,|,test_start_remote_all,test_stop_remote_all,test_shutdown_remote_all,|,test_clear,test_clear_all,|,search,search_reset,|,function_helper,help ># Toolbar icons default size: 22x22. Available sizes are: 22x22, 32x32, 48x48 >#jmeter.toolbar.icons.size=22x22 ># Suggested value for HiDPI >#jmeter.toolbar.icons.size=48x48 > ># Icon definitions ># default: >#jmeter.icons=org/apache/jmeter/images/icon.properties ># alternate: >#jmeter.icons=org/apache/jmeter/images/icon_1.properties ># Historical icon set (deprecated) >#jmeter.icons=org/apache/jmeter/images/icon_old.properties > ># Tree icons default size: 19x19. Available sizes are: 19x19, 24x24, 32x32, 48x48 ># Useful for HiDPI display (see below) >#jmeter.tree.icons.size=19x19 ># Suggested value for HiDPI screen like 3200x1800: >#jmeter.tree.icons.size=32x32 > >#Components to not display in JMeter GUI (GUI class name or static label) ># These elements are deprecated and will be removed in next version: ># MongoDB Script, MongoDB Source Config, Monitor Results ># BSF Elements >not_in_menu=org.apache.jmeter.protocol.mongodb.sampler.MongoScriptSampler,org.apache.jmeter.protocol.mongodb.config.MongoSourceElement,\ > org.apache.jmeter.timers.BSFTimer,org.apache.jmeter.modifiers.BSFPreProcessor,org.apache.jmeter.extractor.BSFPostProcessor,org.apache.jmeter.assertions.BSFAssertion,\ > org.apache.jmeter.visualizers.BSFListener,org.apache.jmeter.protocol.java.sampler.BSFSampler,\ > org.apache.jmeter.protocol.http.control.gui.SoapSamplerGui > ># Number of items in undo history ># Feature is disabled by default (0) due to known and not fixed bugs: ># https://bz.apache.org/bugzilla/show_bug.cgi?id=57043 ># https://bz.apache.org/bugzilla/show_bug.cgi?id=57039 ># https://bz.apache.org/bugzilla/show_bug.cgi?id=57040 ># Set it to a number > 0 (25 can be a good default) ># The bigger it is, the more it consumes memory >#undo.history.size=0 > ># Hotkeys to add JMeter components, will add elements when you press Ctrl+0 .. Ctrl+9 (Command+0 .. Command+9 on Mac) >gui.quick_0=ThreadGroupGui >gui.quick_1=HttpTestSampleGui >gui.quick_2=RegexExtractorGui >gui.quick_3=AssertionGui >gui.quick_4=ConstantTimerGui >gui.quick_5=TestActionGui >gui.quick_6=JSR223PostProcessor >gui.quick_7=JSR223PreProcessor >gui.quick_8=DebugSampler >gui.quick_9=ViewResultsFullVisualizer > > >#--------------------------------------------------------------------------- ># JMX Backup configuration >#--------------------------------------------------------------------------- >#Enable auto backups of the .jmx file when a test plan is saved. >#When enabled, before the .jmx is saved, it will be backed up to the directory pointed >#by the jmeter.gui.action.save.backup_directory property (see below). Backup file names are built >#after the jmx file being saved. For example, saving test-plan.jmx will create a test-plan-000012.jmx >#in the backup directory provided that the last created backup file is test-plan-000011.jmx. >#Default value is true indicating that auto backups are enabled >#jmeter.gui.action.save.backup_on_save=true > >#Set the backup directory path where JMX backups will be created upon save in the GUI. >#If not set (what it defaults to) then backup files will be created in >#a sub-directory of the JMeter base installation. The default directory is ${JMETER_HOME}/backups >#If set and the directory does not exist, it will be created. >#jmeter.gui.action.save.backup_directory= > >#Set the maximum time (in hours) that backup files should be preserved since the save time. >#By default no expiration time is set which means we keep backups for ever. >#jmeter.gui.action.save.keep_backup_max_hours=0 > >#Set the maximum number of backup files that should be preserved. By default 10 backups will be preserved. >#Setting this to zero will cause the backups to not being deleted (unless keep_backup_max_hours is set to a non zero value) >#jmeter.gui.action.save.keep_backup_max_count=10 > >#Enable auto saving of the .jmx file before start run a test plan >#When enabled, before the run, the .jmx will be saved and also backed up to the directory pointed >#save_automatically_before_run=true > >#--------------------------------------------------------------------------- ># Remote hosts and RMI configuration >#--------------------------------------------------------------------------- > ># Remote Hosts - comma delimited >remote_hosts=stress06 >#remote_hosts=localhost:1099,localhost:2010 > ># RMI port to be used by the server (must start rmiregistry with same port) >#server_port=1099 > ># To change the port to (say) 1234: ># On the server(s) ># - set server_port=1234 ># - start rmiregistry with port 1234 ># On Windows this can be done by: ># SET SERVER_PORT=1234 ># JMETER-SERVER ># ># On Unix: ># SERVER_PORT=1234 jmeter-server ># ># On the client: ># - set remote_hosts=server:1234 > ># Parameter that controls the RMI port used by RemoteSampleListenerImpl (The Controller) ># Default value is 0 which means port is randomly assigned ># You may need to open Firewall port on the Controller machine >#client.rmi.localport=0 > ># When distributed test is starting, there may be several attempts to initialize ># remote engines. By default, only single try is made. Increase following property ># to make it retry for additional times >#client.tries=1 > ># If there is initialization retries, following property sets delay between attempts >#client.retries_delay=5000 > ># When all initialization tries was made, test will fail if some remote engines are failed ># Set following property to true to ignore failed nodes and proceed with test >#client.continue_on_fail=false > ># To change the default port (1099) used to access the server: >#server.rmi.port=1234 > ># To use a specific port for the JMeter server engine, define ># the following property before starting the server: >#server.rmi.localport=4000 > ># The jmeter server creates by default the RMI registry as part of the server process. ># To stop the server creating the RMI registry: >#server.rmi.create=false > ># Define the following property to cause JMeter to exit after the first test >#server.exitaftertest=true > ># ># Configuration of Secure RMI connection ># ># Type of keystore : JKS >#server.rmi.ssl.keystore.type=JKS ># ># Keystore file that contains private key >#server.rmi.ssl.keystore.file=rmi_keystore.jks ># ># Password of Keystore >#server.rmi.ssl.keystore.password=changeit ># ># Key alias >#server.rmi.ssl.keystore.alias=rmi ># ># Type of truststore : JKS >#server.rmi.ssl.truststore.type=JKS ># ># Keystore file that contains certificate >#server.rmi.ssl.truststore.file=rmi_keystore.jks ># ># Password of Trust store >#server.rmi.ssl.truststore.password=changeit ># ># Set this if you don't want to use SSL for RMI >#server.rmi.ssl.disable=false >#--------------------------------------------------------------------------- ># Include Controller >#--------------------------------------------------------------------------- > ># Prefix used by IncludeController when building file name >#includecontroller.prefix= > >#--------------------------------------------------------------------------- ># Shared HTTP configuration between HC4 and Java Implementations >#--------------------------------------------------------------------------- > ># ># Should JMeter add to POST request content-type header if missing: ># Content-Type: application/x-www-form-urlencoded ># Was true before version 5.0 >#post_add_content_type_if_missing=false > >#--------------------------------------------------------------------------- ># HTTP Java configuration >#--------------------------------------------------------------------------- > ># Number of connection retries performed by HTTP Java sampler before giving up ># 0 means no retry since version 3.0 >#http.java.sampler.retries=0 > >#--------------------------------------------------------------------------- ># Following properties apply to Apache HttpClient >#--------------------------------------------------------------------------- > ># set the socket timeout (or use the parameter http.socket.timeout) ># for AJP Sampler implementation. ># Value is in milliseconds >#httpclient.timeout=0 ># 0 == no timeout > ># Set the http version (defaults to 1.1) >#httpclient.version=1.1 (or use the parameter http.protocol.version) > ># Define characters per second > 0 to emulate slow connections >#httpclient.socket.http.cps=0 >#httpclient.socket.https.cps=0 > >#Enable loopback protocol >#httpclient.loopback=true > ># Define the local host address to be used for multi-homed hosts >#httpclient.localaddress=1.2.3.4 > >#--------------------------------------------------------------------------- ># AuthManager Kerberos configuration >#--------------------------------------------------------------------------- > ># AuthManager Kerberos configuration ># Name of application module used in jaas.conf >#kerberos_jaas_application=JMeter > ># Should ports be stripped from urls before constructing SPNs ># for SPNEGO authentication >#kerberos.spnego.strip_port=true > ># Should credentials be delegated to webservers when using ># SPNEGO authentication >#kerberos.spnego.delegate_cred=false > >#--------------------------------------------------------------------------- ># Apache HttpComponents HTTPClient configuration (HTTPClient4) >#--------------------------------------------------------------------------- > ># define a properties file for overriding Apache HttpClient parameters ># Uncomment this line if you put anything in hc.parameters file >#hc.parameters.file=hc.parameters > ># If true, default HC4 User-Agent will not be added >#httpclient4.default_user_agent_disabled=false > ># Preemptively send Authorization Header when BASIC auth is used >#httpclient4.auth.preemptive=true > ># Number of retries to attempt (default 0) >httpclient4.retrycount=1 > ># true if it's OK to retry requests that have been sent ># This will retry Idempotent and non Idempotent requests ># This should usually be false, but it can be useful ># when testing against some Load Balancers like Amazon ELB >#httpclient4.request_sent_retry_enabled=false > ># Idle connection timeout (Milliseconds) to apply if the server does not send ># Keep-Alive headers (default 0) ># Set this > 0 to compensate for servers that don't send a Keep-Alive header ># If <= 0, idle timeout will only apply if the server sends a Keep-Alive header >#httpclient4.idletimeout=0 > ># Check connections if the elapsed time (Milliseconds) since the last ># use of the connection exceed this value >#httpclient4.validate_after_inactivity=1700 > ># TTL (in Milliseconds) represents an absolute value. ># No matter what, the connection will not be re-used beyond its TTL. >#httpclient4.time_to_live=2000 > ># Max size in bytes of PUT body to retain in result sampler. ># Bigger results will be clipped. >#httpclient4.max_body_retain_size=32768 > ># Ignore EOFException that some edgy application may emit to signal end of GZIP stream ># Defaults to false >#httpclient4.gzip_relax_mode=false > ># Ignore EOFException that some edgy application may emit to signal end of Deflated stream ># Defaults to false >#httpclient4.deflate_relax_mode=false > >#--------------------------------------------------------------------------- ># HTTP Cache Manager configuration >#--------------------------------------------------------------------------- ># ># Space or comma separated list of methods that can be cached >#cacheable_methods=GET ># N.B. This property is currently a temporary solution for Bug 56162 > ># Since 2.12, JMeter does not create anymore a Sample Result with 204 response ># code for a resource found in cache which is inline with what browser do. >#cache_manager.cached_resource_mode=RETURN_NO_SAMPLE > ># You can choose between 3 modes: ># RETURN_NO_SAMPLE (default) ># RETURN_200_CACHE ># RETURN_CUSTOM_STATUS > ># Those mode have the following behaviours: ># RETURN_NO_SAMPLE: ># this mode returns no Sample Result, it has no additional configuration > ># RETURN_200_CACHE: ># this mode will return Sample Result with response code to 200 and ># response message to "(ex cache)", you can modify response message by setting ># RETURN_200_CACHE.message=(ex cache) > ># RETURN_CUSTOM_STATUS: ># This mode lets you select what response code and message you want to return, ># if you use this mode you need to set those properties ># RETURN_CUSTOM_STATUS.code= ># RETURN_CUSTOM_STATUS.message= > >#--------------------------------------------------------------------------- ># Results file configuration >#--------------------------------------------------------------------------- > ># This section helps determine how result data will be saved. ># The commented out values are the defaults. > ># legitimate values: xml, csv, db. Only xml and csv are currently supported. >#jmeter.save.saveservice.output_format=csv > ># The below properties are true when field should be saved; false otherwise ># ># assertion_results_failure_message only affects CSV output >#jmeter.save.saveservice.assertion_results_failure_message=true ># ># legitimate values: none, first, all >#jmeter.save.saveservice.assertion_results=none ># >#jmeter.save.saveservice.data_type=true >#jmeter.save.saveservice.label=true >#jmeter.save.saveservice.response_code=true ># response_data is not currently supported for CSV output >#jmeter.save.saveservice.response_data=false ># Save ResponseData for failed samples >#jmeter.save.saveservice.response_data.on_error=false >#jmeter.save.saveservice.response_message=true >#jmeter.save.saveservice.successful=true >#jmeter.save.saveservice.thread_name=true >#jmeter.save.saveservice.time=true >#jmeter.save.saveservice.subresults=true >#jmeter.save.saveservice.assertions=true >#jmeter.save.saveservice.latency=true ># Only available with HttpClient4 >#jmeter.save.saveservice.connect_time=true >#jmeter.save.saveservice.samplerData=false >#jmeter.save.saveservice.responseHeaders=false >#jmeter.save.saveservice.requestHeaders=false >#jmeter.save.saveservice.encoding=false >#jmeter.save.saveservice.bytes=true ># Only available with HttpClient4 >#jmeter.save.saveservice.sent_bytes=true >#jmeter.save.saveservice.url=true >#jmeter.save.saveservice.filename=false >#jmeter.save.saveservice.hostname=false >#jmeter.save.saveservice.thread_counts=true >#jmeter.save.saveservice.sample_count=false >#jmeter.save.saveservice.idle_time=true > ># Timestamp format - this only affects CSV output files ># legitimate values: none, ms, or a format suitable for SimpleDateFormat >#jmeter.save.saveservice.timestamp_format=ms >#jmeter.save.saveservice.timestamp_format=yyyy/MM/dd HH:mm:ss.SSS > ># For use with Comma-separated value (CSV) files or other formats ># where the fields' values are separated by specified delimiters. ># Default: >#jmeter.save.saveservice.default_delimiter=, ># For TAB, one can use: >#jmeter.save.saveservice.default_delimiter=\t > ># Only applies to CSV format files: ># Print field names as first line in CSV >#jmeter.save.saveservice.print_field_names=true > ># Optional list of JMeter variable names whose values are to be saved in the result data files. ># Use commas to separate the names. For example: >#sample_variables=SESSION_ID,REFERENCE ># N.B. The current implementation saves the values in XML as attributes, ># so the names must be valid XML names. ># By default JMeter sends the variable to all servers ># to ensure that the correct data is available at the client. > ># Optional xml processing instruction for line 2 of the file: ># Example: >#jmeter.save.saveservice.xml_pi=<?xml-stylesheet type="text/xsl" href="../extras/jmeter-results-detail-report.xsl"?> ># Default value: >#jmeter.save.saveservice.xml_pi= > ># Prefix used to identify filenames that are relative to the current base >#jmeter.save.saveservice.base_prefix=~/ > ># AutoFlush on each line written in XML or CSV output ># Setting this to true will result in less test results data loss in case of Crash ># but with impact on performances, particularly for intensive tests (low or no pauses) ># Since JMeter 2.10, this is false by default >#jmeter.save.saveservice.autoflush=false > >#--------------------------------------------------------------------------- ># Settings that affect SampleResults >#--------------------------------------------------------------------------- > ># Save the start time stamp instead of the end ># This also affects the timestamp stored in result files >sampleresult.timestamp.start=true > ># Whether to use System.nanoTime() - otherwise only use System.currentTimeMillis() >#sampleresult.useNanoTime=true > ># Use a background thread to calculate the nanoTime offset ># Set this to <= 0 to disable the background thread >#sampleresult.nanoThreadSleep=5000 > ># Since version 5.0 JMeter has a new SubResult Naming Policy which numbers subresults by default ># This property if set to true discards renaming policy. This can be required if you're using JMeter for functional testing. ># Defaults to: false >#subresults.disable_renaming=false > >#--------------------------------------------------------------------------- ># Upgrade property >#--------------------------------------------------------------------------- > ># File that holds a record of name changes for backward compatibility issues >upgrade_properties=/bin/upgrade.properties > >#--------------------------------------------------------------------------- ># JMeter Test Script recorder configuration ># ># N.B. The element was originally called the Proxy recorder, which is why the ># properties have the prefix "proxy". >#--------------------------------------------------------------------------- > ># If the recorder detects a gap of at least 5s (default) between HTTP requests, ># it assumes that the user has clicked a new URL >#proxy.pause=5000 > ># Add numeric prefix to Sampler names (default true) >#proxy.number.requests=true > ># List of URL patterns that will be added to URL Patterns to exclude ># Separate multiple lines with ; >#proxy.excludes.suggested=.*\\.(bmp|css|js|gif|ico|jpe?g|png|swf|woff|woff2) > ># Change the default HTTP Sampler (currently HttpClient4) ># Java: >#jmeter.httpsampler=HTTPSampler >#or >#jmeter.httpsampler=Java ># ># HttpClient4.x >#jmeter.httpsampler=HttpClient4 > ># By default JMeter tries to be more lenient with RFC2616 redirects and allows ># relative paths. ># If you want to test strict conformance, set this value to true ># When the property is true, JMeter follows http://tools.ietf.org/html/rfc3986#section-5.2 >#jmeter.httpclient.strict_rfc2616=false > ># Default content-type include filter to use >#proxy.content_type_include=text/html|text/plain|text/xml ># Default content-type exclude filter to use >#proxy.content_type_exclude=image/.*|text/css|application/.* > ># Default headers to remove from Header Manager elements ># (Cookie and Authorization are always removed) >#proxy.headers.remove=If-Modified-Since,If-None-Match,Host > ># Binary content-type handling ># These content-types will be handled by saving the request in a file: >#proxy.binary.types=application/x-amf,application/x-java-serialized-object,binary/octet-stream ># The files will be saved in this directory: >#proxy.binary.directory=user.dir ># The files will be created with this file filesuffix: >#proxy.binary.filesuffix=.binary > >#--------------------------------------------------------------------------- ># Test Script Recorder certificate configuration >#--------------------------------------------------------------------------- > >#proxy.cert.directory=<JMeter bin directory> >#proxy.cert.file=proxyserver.jks >#proxy.cert.type=JKS >#proxy.cert.keystorepass=password >#proxy.cert.keypassword=password >#proxy.cert.factory=SunX509 ># define this property if you wish to use your own keystore >#proxy.cert.alias=<none> ># The default validity for certificates created by JMeter >#proxy.cert.validity=7 ># Use dynamic key generation (if supported by JMeter/JVM) ># If false, will revert to using a single key with no certificate >#proxy.cert.dynamic_keys=true > >#--------------------------------------------------------------------------- ># Test Script Recorder miscellaneous configuration >#--------------------------------------------------------------------------- > ># Whether to attempt disabling of samples that resulted from redirects ># where the generated samples use auto-redirection >#proxy.redirect.disabling=true > ># SSL configuration >#proxy.ssl.protocol=TLS > >#--------------------------------------------------------------------------- ># JMeter Proxy configuration >#--------------------------------------------------------------------------- ># use command-line flags for user-name and password >#http.proxyDomain=NTLM domain, if required by HTTPClient sampler > >#--------------------------------------------------------------------------- ># HTTPSampleResponse Parser configuration >#--------------------------------------------------------------------------- > ># Space-separated list of parser groups >HTTPResponse.parsers=htmlParser wmlParser cssParser ># for each parser, there should be a parser.types and a parser.className property > ># CSS Parser based on ph-css >cssParser.className=org.apache.jmeter.protocol.http.parser.CssParser >cssParser.types=text/css > ># CSS parser LRU cache size ># This cache stores the URLs found in a CSS to avoid continuously parsing the CSS ># By default the cache size is 400 ># It can be disabled by setting its value to 0 >#css.parser.cache.size=400 > ># Let the CSS Parser ignore all css errors >#css.parser.ignore_all_css_errors=true > >#--------------------------------------------------------------------------- ># HTML Parser configuration >#--------------------------------------------------------------------------- > ># Define the HTML parser to be used. ># Default parser: ># This new parser (since 2.10) should perform better than all others ># see https://bz.apache.org/bugzilla/show_bug.cgi?id=55632 ># Do not comment this property >htmlParser.className=org.apache.jmeter.protocol.http.parser.LagartoBasedHtmlParser > ># Other parsers: ># Default parser before 2.10 >#htmlParser.className=org.apache.jmeter.protocol.http.parser.JTidyHTMLParser ># Note that Regexp extractor may detect references that have been commented out. ># In many cases it will work OK, but you should be aware that it may generate ># additional references. >#htmlParser.className=org.apache.jmeter.protocol.http.parser.RegexpHTMLParser ># This parser is based on JSoup, it should be the most accurate but less ># performant than LagartoBasedHtmlParser >#htmlParser.className=org.apache.jmeter.protocol.http.parser.JsoupBasedHtmlParser > >#Used by HTTPSamplerBase to associate htmlParser with content types below >htmlParser.types=text/html application/xhtml+xml application/xml text/xml > >#--------------------------------------------------------------------------- ># WML Parser configuration >#--------------------------------------------------------------------------- > >wmlParser.className=org.apache.jmeter.protocol.http.parser.RegexpHTMLParser > >#Used by HTTPSamplerBase to associate wmlParser with content types below >wmlParser.types=text/vnd.wap.wml > >#--------------------------------------------------------------------------- ># Remote batching configuration >#--------------------------------------------------------------------------- ># How is Sample sender implementations configured: ># - true (default) means client configuration will be used ># - false means server configuration will be used >#sample_sender_client_configured=true > ># By default when Stripping modes are used JMeter since 3.1 will strip ># response even for SampleResults in error. ># If you want to revert to previous behaviour (no stripping of Responses in error) ># set this property to false >#sample_sender_strip_also_on_error=true > ># Remote batching support ># Since JMeter 2.9, default is MODE_STRIPPED_BATCH, which returns samples in ># batch mode (every 100 samples or every minute by default) ># Note also that MODE_STRIPPED_BATCH strips response data from SampleResult, so if you need it change to ># another mode ># Batch returns samples in batches ># Statistical returns sample summary statistics ># mode can also be the class name of an implementation of org.apache.jmeter.samplers.SampleSender >#mode=Standard >#mode=Batch >#mode=Statistical >#Set to true to key statistical samples on threadName rather than threadGroup >#key_on_threadname=false >#mode=Stripped >#mode=StrippedBatch >#mode=org.example.load.MySampleSender ># >#num_sample_threshold=100 ># Value is in milliseconds >#time_threshold=60000 ># ># Asynchronous sender; uses a queue and background worker process to return the samples >#mode=Asynch ># default queue size >#asynch.batch.queue.size=100 ># Same as Asynch but strips response data from SampleResult >#mode=StrippedAsynch ># ># DiskStore: Serialises the samples to disk, rather than saving in memory >mode=DiskStore ># Same as DiskStore but strips response data from SampleResult >#mode=StrippedDiskStore ># Note: the mode is currently resolved on the client; ># other properties (e.g. time_threshold) are resolved on the server. > >#--------------------------------------------------------------------------- ># JDBC Request configuration >#--------------------------------------------------------------------------- > ># String used to indicate a null value >#jdbcsampler.nullmarker=]NULL[ ># ># Max size of BLOBs and CLOBs to store in JDBC sampler. Result will be cut off >#jdbcsampler.max_retain_result_size=65536 > ># Database validation query ># based in https://stackoverflow.com/questions/10684244/dbcp-validationquery-for-different-databases list >jdbc.config.check.query=select 1 from INFORMATION_SCHEMA.SYSTEM_USERS|select 1 from dual|select 1 from sysibm.sysdummy1|select 1|select 1 from rdb$database >jdbc.config.jdbc.driver.class=com.mysql.jdbc.Driver|org.postgresql.Driver|oracle.jdbc.OracleDriver|com.ingres.jdbc.IngresDriver|com.microsoft.sqlserver.jdbc.SQLServerDriver|com.microsoft.jdbc.sqlserver.SQLServerDriver|org.apache.derby.jdbc.ClientDriver|org.hsqldb.jdbc.JDBCDriver|com.ibm.db2.jcc.DB2Driver|org.apache.derby.jdbc.ClientDriver|org.h2.Driver|org.firebirdsql.jdbc.FBDriver|org.mariadb.jdbc.Driver|org.sqlite.JDBC|net.sourceforge.jtds.jdbc.Driver > >#--------------------------------------------------------------------------- ># OS Process Sampler configuration >#--------------------------------------------------------------------------- ># Polling to see if process has finished its work, used when a timeout is configured on sampler >#os_sampler.poll_for_timeout=100 > >#--------------------------------------------------------------------------- ># TCP Sampler configuration >#--------------------------------------------------------------------------- > ># The default handler class >#tcp.handler=TCPClientImpl ># ># eolByte = byte value for end of line ># set this to a value outside the range -128 to +127 to skip eol checking >#tcp.eolByte=1000 ># ># TCP Charset, used by org.apache.jmeter.protocol.tcp.sampler.TCPClientImpl ># default to Platform defaults charset as returned by Charset.defaultCharset().name() >#tcp.charset= ># ># status.prefix and suffix = strings that enclose the status response code >#tcp.status.prefix=Status= >#tcp.status.suffix=. ># ># status.properties = property file to convert codes to messages >#tcp.status.properties=mytestfiles/tcpstatus.properties > ># The length prefix used by LengthPrefixedBinaryTCPClientImpl implementation ># defaults to 2 bytes. >#tcp.binarylength.prefix.length=2 > >#--------------------------------------------------------------------------- ># Summariser - Generate Summary Results - configuration (mainly applies to non-GUI mode) >#--------------------------------------------------------------------------- ># ># Comment the following property to disable the default non-GUI summariser ># [or change the value to rename it] ># (applies to non-GUI mode only) >summariser.name=summary ># ># interval between summaries (in seconds) default 30 seconds >#summariser.interval=30 ># ># Write messages to log file >#summariser.log=true ># ># Write messages to System.out >#summariser.out=true > ># Ignore SampleResults generated by TransactionControllers ># defaults to true >#summariser.ignore_transaction_controller_sample_result=true > > >#--------------------------------------------------------------------------- ># Aggregate Report and Aggregate Graph - configuration >#--------------------------------------------------------------------------- ># ># Percentiles to display in reports ># Can be float value between 0 and 100 ># First percentile to display, defaults to 90% >#aggregate_rpt_pct1=90 ># Second percentile to display, defaults to 95% >#aggregate_rpt_pct2=95 ># Second percentile to display, defaults to 99% >#aggregate_rpt_pct3=99 > >#--------------------------------------------------------------------------- ># BackendListener - configuration >#--------------------------------------------------------------------------- ># ># Backend metrics window mode (fixed=fixed-size window, timed=time boxed) >#backend_metrics_window_mode=fixed ># Backend metrics sliding window size for Percentiles, Min, Max >#backend_metrics_window=100 > ># Backend metrics sliding window size for Percentiles, Min, Max ># when backend_metrics_window_mode is timed ># Setting this value too high can lead to OOM >#backend_metrics_large_window=5000 > >######################## ># Graphite Backend >######################## ># Send interval in second ># Defaults to 1 second >#backend_graphite.send_interval=1 > >######################## ># Influx Backend >######################## > ># Send interval in second ># Defaults to 5 seconds >#backend_influxdb.send_interval=5 >#Influxdb timeouts >#backend_influxdb.connection_timeout=1000 >#backend_influxdb.socket_timeout=3000 >#backend_influxdb.connection_request_timeout=100 > >#--------------------------------------------------------------------------- ># BeanShell configuration >#--------------------------------------------------------------------------- > ># BeanShell Server properties ># ># Define the port number as non-zero to start the http server on that port >#beanshell.server.port=9000 ># The telnet server will be started on the next port > ># ># Define the server initialisation file >beanshell.server.file=../extras/startup.bsh > ># ># Define a file to be processed at startup ># This is processed using its own interpreter. >#beanshell.init.file= > ># ># Define the intialisation files for BeanShell Sampler, Function and other BeanShell elements ># N.B. Beanshell test elements do not share interpreters. ># Each element in each thread has its own interpreter. ># This is retained between samples. >#beanshell.sampler.init=BeanShellSampler.bshrc >#beanshell.function.init=BeanShellFunction.bshrc >#beanshell.assertion.init=BeanShellAssertion.bshrc >#beanshell.listener.init=etc >#beanshell.postprocessor.init=etc >#beanshell.preprocessor.init=etc >#beanshell.timer.init=etc > ># The file BeanShellListeners.bshrc contains sample definitions ># of Test and Thread Listeners. > >#--------------------------------------------------------------------------- ># JSR-223 function >#--------------------------------------------------------------------------- > ># Path to JSR-223 file containing script to call on JMeter startup ># JMeter will try to guess the engine to use by the extension ># of the name of the file. ># This script can use pre-defined variables: ># log : Logger to log any message ># props : JMeter Property ># OUT : System.OUT >#jsr223.init.file= > >#--------------------------------------------------------------------------- ># Groovy function >#--------------------------------------------------------------------------- > >#Path to Groovy file containing utility functions to make available to __groovy function >#groovy.utilities= > ># Example >#groovy.utilities=bin/utility.groovy > >#--------------------------------------------------------------------------- ># MailerModel configuration >#--------------------------------------------------------------------------- > ># Number of successful samples before a message is sent >#mailer.successlimit=2 ># ># Number of failed samples before a message is sent >#mailer.failurelimit=2 > >#--------------------------------------------------------------------------- ># CSVRead configuration >#--------------------------------------------------------------------------- > ># CSVRead delimiter setting (default ",") ># Make sure that there are no trailing spaces or tabs after the delimiter ># characters, or these will be included in the list of valid delimiters >#csvread.delimiter=, >#csvread.delimiter=; >#csvread.delimiter=! >#csvread.delimiter=~ ># The following line has a tab after the = >#csvread.delimiter= > >#--------------------------------------------------------------------------- ># __time() function configuration ># ># The properties below can be used to redefine the default formats >#--------------------------------------------------------------------------- >#time.YMD=yyyyMMdd >#time.HMS=HHmmss >#time.YMDHMS=yyyyMMdd-HHmmss >#time.USER1= >#time.USER2= > >#--------------------------------------------------------------------------- ># CSV DataSet configuration >#--------------------------------------------------------------------------- > ># String to return at EOF (if recycle not used) >#csvdataset.eofstring=<EOF> >#list in https://docs.oracle.com/javase/8/docs/technotes/guides/intl/encoding.doc.html >csvdataset.file.encoding_list=UTF-8|UTF-16|ISO-8859-15|US-ASCII > > >#--------------------------------------------------------------------------- ># LDAP Sampler configuration >#--------------------------------------------------------------------------- ># Maximum number of search results returned by a search that will be sorted ># to guarantee a stable ordering (if more results then this limit are returned ># then no sorting is done). Set to 0 to turn off all sorting, in which case ># "Equals" response assertions will be very likely to fail against search results. ># >#ldapsampler.max_sorted_results=1000 > ># Number of characters to log for each of three sections (starting matching section, diff section, ># ending matching section where not all sections will appear for all diffs) diff display when an Equals ># assertion fails. So a value of 100 means a maximum of 300 characters of diff text will be displayed ># (+ a number of extra characters like "..." and "[[["/"]]]" which are used to decorate it). >#assertion.equals_section_diff_len=100 ># test written out to log to signify start/end of diff delta >#assertion.equals_diff_delta_start=[[[ >#assertion.equals_diff_delta_end=]]] > >#--------------------------------------------------------------------------- ># Miscellaneous configuration >#--------------------------------------------------------------------------- > ># Size of cache used by CSS Selector Extractor (for JODD implementation only) ># to store parsed CSS Selector expressions. >#cssselector.parser.cache.size=400 > > ># Used to control what happens when you start a test and ># have listeners that could overwrite existing result files ># Possible values: ># ASK : Ask user ># APPEND : Append results to existing file ># DELETE : Delete existing file and start a new file >#resultcollector.action_if_file_exists=ASK > ># If defined, then start the mirror server on the port >#mirror.server.port=8081 > ># ORO PatternCacheLRU size >#oro.patterncache.size=1000 > >#TestBeanGui ># >#propertyEditorSearchPath=null > ># Turn expert mode on/off: expert mode will show expert-mode beans and properties >#jmeter.expertMode=true > ># Max size of bytes stored in memory per SampleResult ># Ensure you don't exceed max capacity of a Java Array and remember ># that the higher it is, the higher JMeter will consume heap ># Defaults to 0, which means no truncation >#httpsampler.max_bytes_to_store_per_request=0 > ># Max size of buffer in bytes used when reading responses ># Defaults to 64k >#httpsampler.max_buffer_size=66560 > ># Maximum redirects to follow in a single sequence (default 20) >#httpsampler.max_redirects=20 ># Maximum frame/iframe nesting depth (default 5) >#httpsampler.max_frame_depth=5 > ># Revert to BUG 51939 behaviour (no separate container for embedded resources) by setting the following false: >#httpsampler.separate.container=true > ># If embedded resources download fails due to missing resources or other reasons, if this property is true ># Parent sample will not be marked as failed >httpsampler.ignore_failed_embedded_resources=true > >#keep alive time for the parallel download threads (in seconds) >#httpsampler.parallel_download_thread_keepalive_inseconds=60 > ># Don't keep the embedded resources response data : just keep the size and the md5 ># default to false >#httpsampler.embedded_resources_use_md5=false > ># List of extra HTTP methods that should be available in select box >#httpsampler.user_defined_methods=VERSION-CONTROL,REPORT,CHECKOUT,CHECKIN,UNCHECKOUT,MKWORKSPACE,UPDATE,LABEL,MERGE,BASELINE-CONTROL,MKACTIVITY > ># The encoding to be used if none is provided (default ISO-8859-1) >#sampleresult.default.encoding=ISO-8859-1 > ># CookieManager behaviour - should cookies with null/empty values be deleted? ># Default is true. Use false to revert to original behaviour >#CookieManager.delete_null_cookies=true > ># CookieManager behaviour - should variable cookies be allowed? ># Default is true. Use false to revert to original behaviour >#CookieManager.allow_variable_cookies=true > ># CookieManager behaviour - should Cookies be stored as variables? ># Default is false >#CookieManager.save.cookies=false > ># CookieManager behaviour - prefix to add to cookie name before storing it as a variable ># Default is COOKIE_; to remove the prefix, define it as one or more spaces >#CookieManager.name.prefix= > ># CookieManager behaviour - check received cookies are valid before storing them? ># Default is true. Use false to revert to previous behaviour >#CookieManager.check.cookies=true > ># Netscape HTTP Cookie file >cookies=cookies > ># Ability to switch to Nashorn as default Javascript Engine used by IfController and __javaScript function ># JMeter works as following: ># - JDK >= 8 and javascript.use_rhino=false or not set : Nashorn ># - JDK >= 8 and javascript.use_rhino=true: Rhino ># If you want to use Rhino on JDK8, set this property to true >#javascript.use_rhino=false > ># Number of milliseconds to wait for a thread to stop >#jmeterengine.threadstop.wait=5000 > >#Whether to invoke System.exit(0) in server exit code after stopping RMI >#jmeterengine.remote.system.exit=false > ># Whether to call System.exit(1) on failure to stop threads in non-GUI mode. ># This only takes effect if the test was explicitly requested to stop. ># If this is disabled, it may be necessary to kill the JVM externally >#jmeterengine.stopfail.system.exit=true > ># Whether to force call System.exit(0) at end of test in non-GUI mode, even if ># there were no failures and the test was not explicitly asked to stop. ># Without this, the JVM may never exit if there are other threads spawned by ># the test which never exit. >#jmeterengine.force.system.exit=false > ># How long to pause (in ms) in the daemon thread before reporting that the JVM has failed to exit. ># If the value is <= 0, the JMeter does not start the daemon thread >#jmeter.exit.check.pause=2000 > ># If running non-GUI, then JMeter listens on the following port for a shutdown message. ># To disable, set the port to 1000 or less. >#jmeterengine.nongui.port=4445 ># ># If the initial port is busy, keep trying until this port is reached ># (to disable searching, set the value less than or equal to the .port property) >#jmeterengine.nongui.maxport=4455 > ># How often to check for shutdown during ramp-up (milliseconds) >#jmeterthread.rampup.granularity=1000 > >#Should JMeter expand the tree when loading a test plan? ># default value is false since JMeter 2.7 >#onload.expandtree=false > >#JSyntaxTextArea configuration >#jsyntaxtextarea.wrapstyleword=true >#jsyntaxtextarea.linewrap=true >#jsyntaxtextarea.codefolding=true ># Set 0 to disable undo feature in JSyntaxTextArea >#jsyntaxtextarea.maxundos=50 ># Change the font on the (JSyntax) Text Areas. (Useful for HiDPI screens) >#jsyntaxtextarea.font.family=Hack >#jsyntaxtextarea.font.size=14 > ># Set this to false to disable the use of JSyntaxTextArea for the Console Logger panel >#loggerpanel.usejsyntaxtext=true > ># Maximum size of HTML page that can be displayed; default=10 mbytes ># Set to 0 to disable the size check and display the whole response >#view.results.tree.max_size=10485760 > ># Order of Renderers in View Results Tree ># Note full class names should be used for non jmeter core renderers ># For JMeter core renderers, class names start with . and are automatically ># prefixed with org.apache.jmeter.visualizers >view.results.tree.renderers_order=.RenderAsText,.RenderAsRegexp,.RenderAsBoundaryExtractor,.RenderAsCssJQuery,.RenderAsXPath,org.apache.jmeter.extractor.json.render.RenderAsJsonRenderer,.RenderAsHTML,.RenderAsHTMLFormatted,.RenderAsHTMLWithEmbedded,.RenderAsDocument,.RenderAsJSON,.RenderAsXML > ># Maximum number of results in the results tree ># Set to 0 to store all results (might consume a lot of memory) >#view.results.tree.max_results=500 > ># Maximum size of Document that can be parsed by Tika engine; defaut=10 * 1024 * 1024 (10MB) ># Set to 0 to disable the size check >#document.max_size=0 > >#JMS options ># Enable the following property to stop JMS Point-to-Point Sampler from using ># the properties java.naming.security.[principal|credentials] when creating the queue connection >#JMSSampler.useSecurity.properties=false > ># Set the following value to true in order to skip the delete confirmation dialogue >#confirm.delete.skip=false > ># Used by JSR223 elements ># Size of compiled scripts cache >#jsr223.compiled_scripts_cache_size=100 > >#--------------------------------------------------------------------------- ># Classpath configuration >#--------------------------------------------------------------------------- > ># List of directories (separated by ;) to search for additional JMeter plugin classes, ># for example new GUI elements and samplers. ># Any jar file in such a directory will be automatically included, ># jar files in sub directories are ignored. ># The given value is in addition to any jars found in the lib/ext directory. ># Do not use this for utility or plugin dependency jars. >#search_paths=/app1/lib;/app2/lib > ># List of directories that JMeter will search for utility and plugin dependency classes. ># Use your platform path separator to separate multiple paths. ># Any jar file in such a directory will be automatically included, ># jar files in sub directories are ignored. ># The given value is in addition to any jars found in the lib directory. ># All entries will be added to the class path of the system class loader ># and also to the path of the JMeter internal loader. ># Paths with spaces may cause problems for the JVM >#user.classpath=../classes;../lib > ># List of directories (separated by ;) that JMeter will search for utility ># and plugin dependency classes. ># Any jar file in such a directory will be automatically included, ># jar files in sub directories are ignored. ># The given value is in addition to any jars found in the lib directory ># or given by the user.classpath property. ># All entries will be added to the path of the JMeter internal loader only. ># For plugin dependencies this property should be used instead of user.classpath. >#plugin_dependency_paths=../dependencies/lib;../app1/;../app2/ > ># Classpath finder ># ================ ># The classpath finder currently needs to load every single JMeter class to find ># the classes it needs. ># For non-GUI mode, it's only necessary to scan for Function classes, but all classes ># are still loaded. ># All current Function classes include ".function." in their name, ># and none include ".gui." in the name, so the number of unwanted classes loaded can be ># reduced by checking for these. However, if a valid function class name does not match ># these restrictions, it will not be loaded. If problems are encountered, then comment ># or change the following properties: >classfinder.functions.contain=.functions. >classfinder.functions.notContain=.gui. > > >#--------------------------------------------------------------------------- ># Additional property files to load >#--------------------------------------------------------------------------- > ># Should JMeter automatically load additional JMeter properties? ># File name to look for (comment to disable) >user.properties=user.properties > ># Should JMeter automatically load additional system properties? ># File name to look for (comment to disable) >system.properties=system.properties > ># Comma separated list of files that contain reference to templates and their description ># Path must be relative to JMeter root folder >#template.files=/bin/templates/templates.xml > > >#--------------------------------------------------------------------------- ># Thread Group Validation feature >#--------------------------------------------------------------------------- > ># Validation is the name of the feature used to rapidly validate a Thread Group runs fine ># Default implementation is org.apache.jmeter.gui.action.validation.TreeClonerForValidation ># It runs validation without timers, with 1 thread, 1 iteration and Startup Delay set to 0 ># You can implement your own policy that must extend org.apache.jmeter.engine.TreeCloner ># JMeter will instantiate it and use it to create the Tree used to run validation on Thread Group >#testplan_validation.tree_cloner_class=org.apache.jmeter.validation.ComponentTreeClonerForValidation > ># Number of threads to use to validate a Thread Group >#testplan_validation.nb_threads_per_thread_group=1 > ># Ignore BackendListener when validating the thread group of plan >#testplan_validation.ignore_backends=true > ># Ignore timers when validating the thread group of plan >#testplan_validation.ignore_timers=true > ># Number of iterations to use to validate a Thread Group >#testplan_validation.number_iterations=1 > ># Force throuput controllers that work in percentage mode to be a 100% ># Disabled by default >#testplan_validation.tpc_force_100_pct=false > >#--------------------------------------------------------------------------- ># Think Time configuration >#--------------------------------------------------------------------------- > ># ># Apply a factor on computed pauses by the following Timers: ># - Gaussian Random Timer ># - Uniform Random Timer ># - Poisson Random Timer ># >#timer.factor=1.0f > ># Default implementation that create the Timer structure to add to Test Plan ># Implementation of interface org.apache.jmeter.gui.action.thinktime.ThinkTimeCreator >#think_time_creator.impl=org.apache.jmeter.thinktime.DefaultThinkTimeCreator > ># Default Timer GUI class added to Test Plan by DefaultThinkTimeCreator >#think_time_creator.default_timer_implementation=org.apache.jmeter.timers.gui.UniformRandomTimerGui > ># Default constant pause of Timer >#think_time_creator.default_constant_pause=1000 > ># Default range pause of Timer >#think_time_creator.default_range=100 > > ># Change this parameter if you want to override the APDEX satisfaction threshold. >jmeter.reportgenerator.apdex_satisfied_threshold=500 > ># Change this parameter if you want to override the APDEX tolerance threshold. >jmeter.reportgenerator.apdex_tolerated_threshold=1500 > ># Timeout in milliseconds for Report generation when using Tools > Generate HTML report >#generate_report_ui.generation_timeout=120000 >#--------------------------------------------------------------------------- ># Naming Policy configuration >#--------------------------------------------------------------------------- > ># Prefix used when naming elements >#naming_policy.prefix= ># Suffix used when naming elements >#naming_policy.suffix= > ># Implementation of interface org.apache.jmeter.gui.action.TreeNodeNamingPolicy >#naming_policy.impl=org.apache.jmeter.gui.action.impl.DefaultTreeNodeNamingPolicy > >#--------------------------------------------------------------------------- ># Help Documentation >#--------------------------------------------------------------------------- > ># Switch that allows using Local documentation opened in JMeter GUI ># By default we use Online documentation opened in Browser >#help.local=false > >#--------------------------------------------------------------------------- ># Documentation generation >#--------------------------------------------------------------------------- > ># Path to XSL file used to generate Schematic View of Test Plan ># When empty, JMeter will use the embedded one in src/core/org/apache/jmeter/gui/action/schematic.xsl >#docgeneration.schematic_xsl= View Attachment As Raw

This is ASF Bugzilla: the Apache Software Foundation bug system. In case of problems with the functioning of ASF Bugzilla, please contact bugzilla-admin@apache.org. Please Note: this e-mail address is only for reporting problems with ASF Bugzilla. Mail about any other subject will be silently ignored.

• • Home
  • | New
  • | Browse
  • | Search
  • |
    [?]
  • | Reports
  • | Help
  • | New Account
  • | Log In
    Remember [x]
  • | Forgot Password
    Login: [x]